The authtoken config variable delay_auth_decision must be set to True.
The default is False, but that breaks public access, StaticWeb, FormPost,
TempURL, and authenticated capabilities requests (using Discoverability).

Change-Id: I420a95f5f9fda3321a4acfc5846e40294a8bd588
Closes-Bug: #1768795

This reverts commit f8fd0601.

Based on the code, overall uses service_credentials, but looks like a
few parts is using keystonemiddleware.auth_*

Closes-Bug: #1775956

Change-Id: I766a5624737cae892fe77fa8151b20e0972ed5b2

Both the driver and the enabled_drivers options are being removed
this week. Stop setting them to avoid breakages.

Change-Id: I0e0bf851424b8f5839b159ef83f1cc65c30e2fb3

Kolla-ansible supports the deployment with specified tags,
"--tags, -t <tags> Only run plays and tasks tagged with
these values".
However, when specifying a tag, if the tag of the task
is not "always" or different from the specified tag,
it will not be run.
This task "Gather facts for all hosts (if using --limit)"
is not executed when the --limit parameter is added and
deployment with specified tag.

Closes-bug: #1711266

Change-Id: If50db2718b765f1d65b5d79eb042b0d95775bafc

Deploy multipathd with cinder-volume when multipathd is enabled

Change-Id: Ibc6cab29498508769d6c42a870cf34f587ec7cc7
Closes-Bug:1757379

neutron-vpnaas-dashboard is split into standalone repo. Need enable it
dynamic.

Depends-On: Ife1e39d4fff9e878a101ff716545166a30091f69
Change-Id: Ia3faa5b52f9321349e57902b5b1d90068d388cc0
Closes-Bug: #1777750

Some Murano applications require much longer time than default
1 hour to be deployed.

Change-Id: I395e9e3e8cccf70f316f313847648841822e639a
Closes-Bug: #1777670

1. refer to the docs of external ceph for manila[0],
the ceph.conf will be found in ``/etc/kolla/config/manila/``,
so remove the unnecessary ``manila/manila-share`` folder
2. remove the ``manila/manila/ceph.client.manila.keyring``

[0]: https://github.com/openstack/kolla-ansible/blob/master/doc/source/reference/external-ceph-guide.rst

Change-Id: I93308b859b769a856c0519347277f01947f86f3d

Support Kolla Ceph to deploy blustore OSDs with Kolla-ansible.

Please refer to [1] for bluestore OSD configuration

The patch includes:
1. Set Ceph OSD store type group_vars/all.yml. The default value
is "bluestore" in Rocky.

2. Make Kolla Ceph to deploy bluestore OSDs with Kolla-ansible

3. Update gate test configuration for Ceph bluestore OSD test

[1]: specs/kolla-ceph-bluestore.rst

Partially-Implements: blueprint kolla-ceph-bluestore
Depends-On: I00eaa600a5e9ad4c1ebca2eeb523bca3d7a25128
Change-Id: I14f20a00654dff32c36d078ebb9005d91a3e60b2
Signed-off-by: Tone Zhang <tone.zhang@arm.com>

Provide support for kolla dev mode in designate. When
'kolla_dev_mode' or 'designate_dev_mode' variables are
enabled, source code of designate project is cloned
and bindmounted.

Partially implements: blueprint mount-sources
Co-Authored-By: zhulingjie <easyzlj@gmail.com>

Change-Id: Ib23fbd3d5ebc7e3ac372e0db1e0048d333eb95c0

Change-Id: Ifd9d7a8a2c16998e20e337a87fff99c3872dc1c2

Provide support for kolla dev mode in Watcher. When
'kolla_dev_mode' or 'watcher_dev_mode' variables are
enabled, source code of Watcher project is cloned
and bind mounted.

Partially implements: blueprint mount-sources

Change-Id: I104c010a8308607b68fc8c7352a0511d16f06fb5

Provide support for kolla dev mode in vitrage. When
'kolla_dev_mode' or 'vitrage_dev_mode' variables are
enabled, source code of vitrage project is cloned
and bind mounted.

Partially implements: blueprint mount-sources
Co-Authored-By: zhulingjie <easyzlj@gmail.com>

Change-Id: I095f2b33857abbdd0167ae52899407f2d86229d0

Multiple Monasca services will need to access these topics. We
can use these variables to make sure that they all use the correct
ones.

Change-Id: I9f40090287542a78dc7d7c6bdd3933abb32918d7
Partially-Implements: blueprint monasca-roles

Co-Authored-By: rhcayadav <rhcayadav@gmail.com>

Change-Id: I3c2c56decbb9de86101f45592ba8135c49c49405
Closes-Bug: #1754424

Provide support for kolla dev mode in congress. When
'kolla_dev_mode' or 'congress_dev_mode' variables are
enabled, source code of congress project is cloned
and bind mounted.

Partially implements: blueprint mount-sources

Change-Id: Ie6bf33aaac98d237032410a7c0a6e60e35a3fb00

Provide support for kolla dev mode in cinder. When
'kolla_dev_mode' or 'cinder_dev_mode' variables are
enabled, source code of cinder project is cloned
and bind mounted.

Partially implements: blueprint mount-sources

Change-Id: I9ccd395d076f9cc1ad4b51af9d22ba8b17fac1bc

There is no need to load custom ceph.conf and keyring from different
folder for gnocchi components. Just load the files from
node_custom_config/gnocchi folder.

Depends-On: I379ff17856509c9321b86c13a72eacc18f5c1202
Change-Id: Id553dff274a29d82fb1b743437e3656d6f817e52

In Ansible 2.3.0 when statements should not include jinja2 templating
delimiters such as {{ }} or {% %}
this ps fixes it

Change-Id: I33a42eb8184b77e78332caa2a255e0f251fdf9fc

Some services were enabled by default which, even though they were
never deployed when prometheus wasn't enabled, could cause problems
if the monitoring inventory group was empty.  Changed these services
to be enabled based on whether prometheus is enabled.

Change-Id: I0956a1b65a3577cd57fe3b16a95bc3d64fc142ba

Add become to all tasks that use the module "kolla_docker"

Change-Id: I4309c4011687b88ec31d739fd8f834fe2326ff10
Partial-Implements: blueprint ansible-specific-task-become

Provide support fot kolla dev mode in sahara. When
'kolla_dev_mode' or 'sahara_dev_mode' variables are
enabled, source code of sahara  project will be  cloned
and  mounted automatically

Partially implements: blueprint mount-sources

Change-Id: I496ea4443ec8ffc4dc9d0f0d3e6a4514d16ed336
Co-Authored-By: zhulingjie <easyzlj@gmail.com>

refer to https://docs.openstack.org/heat/latest/install/install-rdo.html

Change-Id: I714c0e643631755802901a33d739963c54054191

Change-Id: I5f8598368ad93530d159816c004f27765b165afc

Patch [0] left 2 variables for authentication one is
openstack_swift_auth and the other (inexistent) openstack_ceph_rgw_auth
for the ceph_rgw start_keystone task.

This patch leaves only openstack_ceph_rgw_auth.

Closes-Bug: #1769463

[0] https://github.com/openstack/kolla-ansible/commit/84ade4e1499d0762c8ffa8adb3a2b9003476e99c



Change-Id: I1cc522d91f8258f4ca23afc10a0a2a2b35c1ff68
Signed-off-by: Jorge Niedbalski <jorge.niedbalski@linaro.org>

By default, Ceilometer uses polling.yaml as cfg_file [1][2] that defines
the limit default numbers of metrics polled. Users may want to define
their own polled metrics.

[1] https://github.com/openstack/ceilometer/blob/master/ceilometer/polling/manager.py#L54
[2] https://github.com/openstack/ceilometer/blob/master/etc/ceilometer/polling.yaml

Change-Id: Iadd627ca3c767453e71c8a0c2044f00f30055f16

the sahara service-type is data-processing,not data_processing
if use data_processing,the sahara client will take mistake.
refer to [1]

[1] https://docs.openstack.org/sahara/latest/install/installation-guide.html#common-installation-steps


Co-Authored-By: zhulingjie <easyzlj@gmail.com>

Change-Id: I4c6704a81921bf713073451dc4e93e44234e5a7c

Change-Id: Ia94c10ca8292d803bc20650fb1d496002455338f
Closes-Bug: #1771968

We still default to kolla_internal_vip_address. However, in some cases
this won't work, such as when kolla_internal_vip_address is a hostname,
not an IP. This way users can override it in globals.

Change-Id: I393a2a41ed3bf91f325042cca2310175927bdb40

task file name for prechecks is precheck.yml so rename prechecks.yml to
precheck.yml for ovsdpdk.

Closes-Bug: #1774758

Change-Id: I51415ae4dd0f0fcbe45310ba27cad479ba62bac6
Signed-off-by: Wonil Choi <wonil22.choi@samsung.com>

Allows users to develop on ironic using Kolla.

Partially implements: blueprint mount-sources

Change-Id: I74540f5bcbf723f097f3dea96dcaf067834c493a

NSXV3 is the OpenStack support for the NSX Transformers platform.
This is supported from neutron in the Mitaka version. This patch
adds Kolla support

This adds a new neutron_plugin_agent type 'vmware_nsxv3'. The plugin
does not run any neutron agents.

Change-Id: I1ecd7e5f3471e4ff03cfe8c9a3aff17af3fe1842

Using rabbitmq service defined in default when
boot rabbitmq_bootstrap.
Not a bug here, just an enhancement.

Change-Id: I79f0f7efe3308ed4eb898b85a6370be1bd637d9a

Change-Id: I8dca3e04d12c7da97f23ff9a297b692f86bbc85b

Currently osprofiler only choose elasticsearch,
which is only supported on x86.
On other platform like aarch64 osprofiler can
not be used since no elasticsearch package.

Enable osprofiler by enable_osprofiler: "yes",
which choose elasticsearch by default.
Choose redis by enable_redis: "yes" & osprofiler_backend: "redis"
On platform without elasticsearch support like aarch64
set enable_elasticsearch: "no"

Change-Id: I68fe7a33e11d28684962fc5d0b3d326e90784d78

Some options can't be add in the daemon.json
The only way to configure daemon is to add option in the service file

Change-Id: I88697951ed6518f62bca30bb52288ad0e487ec03

freezer-scheduer container will run on freezer-scheduler hosts[0],
but it missing in site.yml, when freezer-api and freezer-scheduler
run on different hosts, it will failed.

[0]: https://github.com/openstack/kolla-ansible/blob/master/ansible/inventory/multinode#L376

Change-Id: I1bd36c7c57345ee63cd153df8bd0603badf0d8a2

Using mariadb service defined in default when boot bootstrap_mariadb
Not a bug here, just an enhancement.

Change-Id: I1f8b51fb6177a8524483e600701924dbfc3403cb

In common role, when check common container for cron restart,
we should use cron_container.changed instead of
check_common_containers.changed

Change-Id: Ifaaa437f5e205e970371fbb3660b68df352eb440
Closes-Bug: #1773923

cAdvisor (Container Advisor) provides metrics on resource usage and
performance characteristics of running containers.  This change
deploys a cadvisor container and configures prometheus to scrape
data from it.

Change-Id: I55dd4fee954f9be68efda397746861ddaaa0a565
Partially-Implements: blueprint prometheus