Until the Monasca Kafka client fork is removed it is currently required
to run Kafka in compatibility mode. It is also necessary to disable
an optimisation in the Kafka brokers to clean up idle connections. This
is because the optimisation was added after the Monasca Kafka client was
forked, and the client hasn't been updated since. These settings are now
applied automatically when Monasca is enabled.

Change-Id: I6935f1fb29f4f731cf3c9a70a0adf4d5812ca55e

Use option "enabled_filters" from group "filter_scheduler".

Change-Id: I042f0b011c060f9dbc645dbdbb60068cb41c0cc8

Change-Id: I12af64725c0beec2ece0367c3773230c57908254

By default, docker containers inherit ulimit from limits of docker
deamon. On CentOS 7, docker daemon default NOFILE is 1048576.
It can found in /usr/lib/systemd/system/docker.service.
The big limit will cause many problem. we should control it in
production environment.

Change-Id: Iab962446a94ef092977728259d9818b86cfa7f68

Change-Id: I89d9f7a90d72e6c5df7dde078ed7407eedd6f92f

Change-Id: If87cdb132875c4e2c5dff2cc427e00f7a95927de

Since Rocky release Kolla Ceph supports both bluestore and
filestore Ceph OSD. In multinode mode, users can overwrite
“ceph_osd_store_type” in the inventory file and deploy the mixed
Ceph OSD.

Change-Id: I4582861c81fdea5fb67114cf3ac1e48f7812f0d7
Signed-off-by: tone.zhang <tone.zhang@arm.com>

Change-Id: I3bd50cb1e7db85acbf8ab20fc7bdd945b5232aaa

Add an enable_cinder_backend_quobyte option to etc/kolla/globals.yml to
enable use the Quobyte Cinder backend.
Change the bind mounts for /var/lib/nova/mnt to include the shared
propogation if Quobyte is enabled.
Update the documentation to include a section on configuring the Cinder.

Implements: blueprint cinder-quobyte-backend

Change-Id: I364939407ad244fe81cea40f880effdbcaa8a20d

Added the missing option neutron_plugin_agent: "opendaylight" added to
the opendaylight documentation page. Without it the deployment would
not use the neutron_plugin_agent but the default one: openvswitch .

Change-Id: I56a377e1faab9a50f36383ea59b45bf5a9155bcf

When using external Ceph the operator must create pools for each service
and configure keyrings with appropriate permissions. The official Ceph
docs describe this in detail so let operators know this.

Change-Id: Ic3e52e1fbbf09ec09ac21b5b3067092b195812f1

Closes-Bug: #1804850
Change-Id: Icb7edbac5df316af68972cafa448a261c26747b0

Specifying a nic for dnsmasq when using ironic inspector,
by default is network_interface

Change-Id: I579c667c40b14030f340c1f3d7f57fe37613ee1a

Change index to ease identify what service want to look.
Split docs into more specific folder such as networking
and storage.

Change-Id: Ic7ac12b3dd555fa5c018eeb897ccd4a5a2dfe8f3

Add documentation about glance backends,
upgrades and futher configuration.

Change-Id: Ibb15804fa3f38abab855084dd7d7b83fd4a54b8f

Change-Id: Ib0ef21f23a8b54d43278454bbd6ed6bde419c5f0

This comment is to remind those who use Kolla to deploy Cinder
of bug #1631072 (https://bugs.launchpad.net/kolla/+bug/1631072),
in which the folder /sys/kernel/config is either empty
or not created in several operating systems.

Related-Bug: #1631072
Change-Id: Ieef9a8292dbac32e8c11aa2916fce3a133732160

Since the monasca-grafana image was added, it is no longer
necessary to build the grafana image. The monasca-grafana
images will be built with the other monasca images.

Change-Id: I0f6bdb58e6d0abadf59155f01c9340110e9be9ce

Add a quickstart guide to get users going with Monasca and fix a couple
of nits in the documentation.

Partially-Implements: blueprint monasca-roles
Change-Id: Ic4f95f04ce966fc38ecccfba59439b73ef22bcda

The Monasca Grafana fork allows users to log into Grafana with their
OpenStack user credentials and see metrics associated with their
OpenStack project. The long term goal is to enable Keystone support
in upstream Grafana, but this work seems to have stalled.

Partially-Implements: blueprint monasca-grafana
Change-Id: Icc04613b2571c094ae23b66d0bcc38b58c0ee4e1

Change-Id: I309be8e4fecb8f2f89264d84ae4a2e302f996988
Partially-Implements: blueprint monasca-roles

Partially-Implements: blueprint monasca-roles
Change-Id: I19db9396bb53b6db77cf97d7969ca24a55d8db0e

Following by https://review.openstack.org/#/c/605097/
These were used by now-dead tooling. We can remove them.

Change-Id: I0953751044f038a3fdd1acd49b3d2b053ac4bec8

Create bluestore/filestore subsections in ceph-guide and add note
about using bluestore by default - for better readability.

Change-Id: Ib51706838ecf35ac274053b916b3a17f0de90758

Co-authored-by: Mark Goddard <mark@stackhpc.com>
Change-Id: I2e5ecf5b01cc842ec480fc4d883a7d2283fc1c31

The current bluestore disk label naming is inconsistent with the
filestore. The filestore naming format is that the disk prefixes
belonging to the same osd are the same and the suffixes are
different.

This patch keeps the bluestore's disk naming as well.

Change-Id: I71dda29fc4a6765300ce7bb173d2c448c24f6eca

This allows you to append additional kernel parameters
to the kernel used for inspection.

Change-Id: Ibc851145a3ffdaaad526ef999c8f024bd222dd5b

Configure automatically ODL version based on the package version
rather than maintain a hardcoded version.

This has caused many issue while package version differs with the variable
set.

Closes-Bug: 1784784
Change-Id: I15da5d2583b5727942d598d183cc481f0e33d0e6

Some trivial corrections to the cinder-guide documentation.

TrivialFix

Change-Id: Ia8da35005f70d68366f2cb37297a278f4b0f93a4

This is configured via the ironic_dnsmasq_default_gateway variable, and
is not set by default.

Change-Id: I4deea65876d0852ba2b48a8cf9bad94f4df2a18d

This commit is to apply resource-constraints only to few OpenStack services.
Commit to apply constraints to other services will be made in coming commits.

Partially-Implements: blueprint resource-constraints

Change-Id: Icafa54baca24d2de64238222a5677b9d8b90e2aa

By default ceph-rgw is not completely comaptible with Swift API,
because of the restriction for Swift INFO API.[0]

The patch improve ceph-rgw compatibility with Swift API. It is
controlled by the option "ceph_rgw_compatibility" in
ansible/group_vars/all.yml.

After changing the option, run the "reconfigure" command to enable.

Closes-Bug: #1783456

[0] https://github.com/ceph/ceph/pull/17967



Change-Id: Ibf3eb52280e197965caef08a44ae226c4f884cb5
Signed-off-by: tone.zhang <tone.zhang@arm.com>

- Change to openstack CLI
- Change the way to run demo from "sh" to "./" for
matching with README.rst in tacker demo folder.

Change-Id: I17b755cd8d52f594785ef13634bfa233e63841a7

This commit will constrain the dimensions of service `Nova`
and sub-containers deployed along with it.

A user can give the dimension values in `/etc/kolla/globals.yml`
the data-types just like stated in this commit.

Reference-Docs:
https://docs.docker.com/config/containers/resource_constraints/

Added Test-cases for the same.

Partially-Implements: blueprint resource-constraints
Change-Id: I6458d8fb7b26a6e7c3a9fd0d674d9cf129b0bf5d

Both the driver and the enabled_drivers options are being removed
this week. Stop setting them to avoid breakages.

Change-Id: I0e0bf851424b8f5839b159ef83f1cc65c30e2fb3

Update ceph-guide document for Ceph bluestore OSD deployment.

Partially-Implements: blueprint kolla-ceph-bluestore

Change-Id: Idb94b6dd4795b4a196914c82299f787c81799d15
Signed-off-by: Tone Zhang <tone.zhang@arm.com>

Fix typo in doc/source/reference/swift-guide.rst

Change-Id: I9e355a5e8ec6c106c15f8480c7322cf6b33a7d4d

When enable_ironic_ipxe is set in /etc/kolla/globals.yml,
the following happens:

- a new docker container, ironic_ipxe, is created. This contains
  an apache webserver used to serve up the boot images
- ironic is configured to use ipxe

Change-Id: I08fca1864a00afb768494406c49e968920c83ae7
Implements: blueprint ironic-ipxe

For compliance with the Project Testing Interface [1]
as described in [2]

[1]
https://governance.openstack.org/tc/reference/project-testing-interface.html
[2]
http://lists.openstack.org/pipermail/openstack-dev/2017-December/125710.html

doc8 command is dropped from docs tox envs.
So this affect nothing and run in PEP8.

Related-Bug: #1765348

Depends-On: Icc7fe3a8f9716281de88825e9d5b2fd84de3d00a
Change-Id: Idf9a16111479ccc64004eac9508da575822a3df5

By now, ironic-dnsmasq has default bootfile pxelinux.0,
which is correct only for x86.
Adding ironic_dnsmasq_boot_file parameter to globals.yml
to make it configuable.
For example: /etc/kolla/globals.yml
ironic_dnsmasq_boot_file: "debian-installer/arm64/bootnetaa64.efi"

Change-Id: I6eb57702d4dad549ef8c999c1c82e577f316d8d6