This change bumps up max supported Ansible version
to 4.x (ansible-core 2.11.x) and minimum to 2.10.

Change-Id: I8b9212934dfab3831986e8db55671baee32f4bbd

* add CentOS Stream 8 info & reno
* mark RHEL as deprecated in docs

Change-Id: Ifa3b8c7365e4092202bf9e89b67293cf8d983e0a

Min version stays as 2.9

Change-Id: I7ec8c5eb36757248c9aa016dc7d4e495ec5bb635

There are inconsitencies across the documentation and the source code files
when it comes to project's name (Kolla Ansible vs. Kolla-Ansible). This
commit aims at unifying it so that the naming becomes consistent everywhere.

Change-Id: I903b2e08f5458b1a1abc4af3abefe20b66c23a54

Python virtual environment creation fails on a fresh system if
python3-venv is not installed (Debian/Ubuntu).

Installation instructions used to be in the Quick Start guide, but
were removed in kolla-ansible/+/735894

Change-Id: I867322ee43d509fe46b6afba9216586515fee0d5

* Use 'apt install' command instead of legacy 'apt-get'

Change-Id: Idae8d325bce354fa3b4c5be412965122af8f1413

fix the rest of  mistakes, and remove duplicated line.

Change-Id: Id50dfd9cfa794526bdb69ee6372a29c0584310d3

The openstack Ussuri and Victoria versions no longer support the
Centos7 and pyrhon2 environment packages. Correct the missing
problems in the latest document

Change-Id: I55fd1bf451d2bdae696ab32d1faffaba72701229

It should be bumped by [1], but missing, this PS to
be supplement.

[1]: https://review.opendev.org/#/c/753776/2

Depends-On: I5befc72a4894d625ca352b27df9d3aa84a2f5b2c
Change-Id: I75742653cb62c27317abf297a0143399d6adc644

Change-Id: I5befc72a4894d625ca352b27df9d3aa84a2f5b2c

There is a time once every 2 years when ubuntu team releases new LTS
release. And then UCA joins with binary packages for current OpenStack
development cycle.

It is this time for Ubuntu 20.04 'focal'.

Includes CI fix to pass:

[CI] Temporarily block new Ansible

The proper fix [1] needs fixing older branches before newer.
This one allows to fix CI first, in the usual order.

To revert after [1] gets merged in all relevant branches.

[1] https://review.opendev.org/745648

Old-Change-Id: Ifbd37d8addd4322773118e2e9d46494741a8ae66
Related-Bug: #1891145

Depends-on: https://review.opendev.org/#/c/738994/


Change-Id: Ib8b70ee40ec2d19509cc84c0f530612f81907721
Co-Authored-By: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Mostly due to move to Python3-only.

Also fix the other venv docs to avoid virtualenv. :-)

Change-Id: Id89c4ec6ff8b80feace01a3dee7dd30dd4cc5ec5

Added a spec file for this blueprint.
Changed the kolla-ansible script to accept more than one
globals.yml file. That will still be the main one but operators
will be able to create more, under the /etc/kolla/globals.d
directory.
Also added some paragraphs in the quickstart documentation
about this.
Finally, Adding a release note

Change-Id: I34eb91d0e2ed80694594b8fc6801cf8ad77da754
Implements: blueprint multiple-globals-files

Python packages are now prefixed with 'python3' instead of 'python'.
'bridge-utils' is also no longer shipped.

Change-Id: I6e8765e53fd5c3a7f7169671d75e965c22213c61
Signed-off-by: Luke Short <ekultails@gmail.com>

The removed parts are *not* to be done 99% of operators' time,
especially for quickstart procedure.
Kolla Ansible is meant to default to a compatible release.

See [1] as well.

[1] https://review.opendev.org/730498

Change-Id: Iadafcd992a9fd030fa62fb5f7f9429c3f479ac1b

Adds a support matrix page to documentation.

Change-Id: Ia783f7c42219617cde2accd3f1db013c9bda7679

Kolla-Ansible Ceph deployment mechanism has been deprecated in Train [1].

This change removes the Ansible code and associated CI jobs.

[1]: https://review.opendev.org/669214

Change-Id: Ie2167f02ad2f525d3b0f553e2c047516acf55bc2

Change-Id: I03ee4020cfb277fd3d6c5f5c70a3a6eeee2cac9e

Maximum supported version is set to 2.9

Updated the minimum supported version to 2.8

Implements: blueprint ansible-max-version

Change-Id: I97cc95e37f49886e6d74f2d5a789b923b14b5a2d

We have agreed to remove support for Oracle Linux.

http://lists.openstack.org/pipermail/openstack-discuss/2019-June/006896.html

Change-Id: If11b4ff37af936a0cfd34443e8babb952307882b

These filters can be used to capture a lot of the logic that we
currently have in 'when' statements, about which services are enabled
for a particular host.

In order to use these filters, it is necessary to install the
kolla_ansible python module, and not just the dependencies listed in
requirements.txt. The CI test and quickstart install from source
documentation has been updated accordingly.

Ansible is not currently in OpenStack global requirements, so for unit
tests we avoid a direct dependency on Ansible and provide fakes where
necessary.

Change-Id: Ib91cac3c28e2b5a834c9746b1d2236a309529556

This is required for the dict2items filter.

Change-Id: I60a04e839bf06506ff36c2631a286130d5fde972

This change makes kolla-ansible more compatible with
RHEL which does not provide epel-release package.

EPEL was required to install simplejson from rpm
which was an ansible requirement when used python
version was below 2.5 ([1]). This has been obsolete for
quite a time so it's a good idea to get rid of it.

This change includes update of docs to read more properly.

[1] https://docs.ansible.com/ansible/2.3/intro_installation.html



Change-Id: I825431d41fbceb824baff27130d64dabe4475d33
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>

This is necessary for some Ansible tests which were renamed in 2.5 -
including 'version' and 'successful'.

Change-Id: Iacf88ef5589c7571fcf56ba8b99d3dbe76975195

This ensures we have version-specific references to other projects [1].
Note that this doesn't mean the URLs are actually valid - we need to do
more work (linkcheck?) here, but it's an improvement nonetheless.

[1] https://docs.openstack.org/openstackdocstheme/latest/#external-link-helper

Change-Id: I118e4d211617c5df66ff04dc04e308a1d2fc67ad

Change-Id: If4c78c5ccefc6ff987b70509379dd91588eeea70
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Script looks like it is meant to be run and docs mention
running it rather than sourcing, yet the examples sourced it.

Change-Id: Ib4492ae01bee11b562022099cee8b06b4e3ee3c1
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Depends-On: https://review.opendev.org/662209


Co-authored-by: Stephen Finucane <stephenfin@redhat.com>
Closes-Bug: #1830586
Change-Id: I48d3f4c5f7c04b1ab41b3bad2a6c19e1e9a218fd

The etc_examples and inventory should be copied from the virtual
environment rather than the system.

Change-Id: I3ac1e057971b7481a0bce2a15351031e51bf97d6
Closes-Bug: #1829435

Remove some unexpected indents.

Change-Id: I50b8239ab7270814ffc8be9affb3bd28ce1f855b

* Recommend using a virtual environment
* Fix reference to multinode inventory
* Add explicit use of sudo where necessary
* Change ownership of /etc/kolla to current user

These changes should make it possible to copy/paste from the quickstart
to get a working deployment.

Change-Id: Ib3990f9e16eaa1e19a4ad5bfea5bdb2e4bc1c333

To avoid links to OpenStack docs getting out of date in our docs, use
the latest version.

Ideally after cutting each stable branch we should change these links to
use the current release.

Co-Authored-By: Isaiah Inuwa
Change-Id: Ia1e3c720f4e688861b8f76874a3943b0f4e50b17

Change-Id: Ia1b29ca85e8ddb4d9bc740888d92bb2378a44fbf
Closes-Bug: #1803874

Following by https://review.openstack.org/#/c/605097/
These were used by now-dead tooling. We can remove them.

Change-Id: I0953751044f038a3fdd1acd49b3d2b053ac4bec8

Now, kolla-ansible support non-root to deploy[0], the note is
outdated and inaccuracy, remove it is necessary

[0]: https://github.com/openstack/kolla-ansible/blob/master/ansible/group_vars/all.yml#L18

Change-Id: I4fc005949afd64389bc2be68161426c6a2590ca4

Change-Id: I6875cde5c3cc7775c39011816c513e73df3396db

ansible command need assign hosts to run.

Change-Id: Ifadc48ba06ef1726aa73b21ff37366360cfffbbe

Change-Id: Ib9b9440ce56ab2632d2a17c04be7c786b0b3688f

Change-Id: I0e3c098db9d1f0a8fda383910c05ed5efc929994

setuptools should be used as a base dependency package that deployment kolla-ansible.

Change-Id: I4737fcd157342b37a8304cadfb20e24fe585a8b4
Closes-Bug: #1776426