Newer
Older
====================================
This guide describes how to use `Vagrant <https://vagrantup.com>`__ to assist in
Vagrant is a tool for building and managing virtual machine environments in
a single workflow. Vagrant takes care of setting up CentOS-based VMs for Kolla
development, each with proper hardware like memory amount and number of
network interfaces.
The Vagrant script implements **all-in-one** or **multi-node** deployments.
**all-in-one** is the default.
In the case of **multi-node** deployment, the Vagrant setup builds a cluster
with the following nodes by default:
* 3 control nodes
* 1 compute node
* 1 storage node (Note: ceph requires at least 3 storage nodes)
* 1 network node
* 1 operator node
The cluster node count can be changed by editing the Vagrantfile.
Kolla runs from the operator node to deploy OpenStack.
All nodes are connected with each other on the secondary NIC. The primary NIC
is behind a NAT interface for connecting with the Internet. The third NIC is
connected without IP configuration to a public bridge interface. This may be
used for Neutron/Nova to connect to instances.
Start by downloading and installing the Vagrant package for the distro of
choice. Various downloads can be found at the `Vagrant downloads
<https://www.vagrantup.com/downloads.html>`__.
Install required dependencies as follows:
sudo dnf install ruby-devel libvirt-devel zlib-devel libpng-devel gcc \
qemu-kvm qemu-img libvirt python3-libvirt libvirt-client virt-install git
For Ubuntu 16.04 or later:
.. code-block:: console
sudo apt install vagrant ruby-dev ruby-libvirt python-libvirt \
qemu-utils qemu-kvm libvirt-dev nfs-kernel-server zlib1g-dev libpng12-dev \
gcc git
.. note::
Many distros ship outdated versions of Vagrant by default. When in
doubt, always install the latest from the downloads page above.
Next install the hostmanager plugin so all hosts are recorded in ``/etc/hosts``
(inside each vm):
.. code-block:: console
vagrant plugin install vagrant-hostmanager
If you are going to use VirtualBox, then install vagrant-vbguest:
.. code-block:: console
vagrant plugin install vagrant-vbguest
Vagrant supports a wide range of virtualization technologies. If VirtualBox is
used, the vbguest plugin will be required to install the VirtualBox Guest
Additions in the virtual machine:
.. code-block:: console
vagrant plugin install vagrant-vbguest
This documentation focuses on libvirt specifics. To install vagrant-libvirt
plugin:
.. code-block:: console
vagrant plugin install --plugin-version ">= 0.0.31" vagrant-libvirt
Some Linux distributions offer vagrant-libvirt packages, but the version they
provide tends to be too old to run Kolla. A version of >= 0.0.31 is required.
To use libvirt from Vagrant with a low privileges user without being asked for
a password, add the user to the libvirt group:
.. code-block:: console
sudo gpasswd -a ${USER} libvirt
newgrp libvirt
.. note::
In Ubuntu 16.04 and later, libvirtd group is used.
Setup NFS to permit file sharing between host and VMs. Contrary to the rsync
method, NFS allows both way synchronization and offers much better performance
than VirtualBox shared folders. For CentOS:
#. Add the virtual interfaces to the internal zone:
.. code-block:: console
sudo firewall-cmd --zone=internal --add-interface=virbr0
sudo firewall-cmd --zone=internal --add-interface=virbr1
#. Enable nfs, rpc-bind and mountd services for firewalld:
.. code-block:: console
sudo firewall-cmd --permanent --zone=internal --add-service=nfs
sudo firewall-cmd --permanent --zone=internal --add-service=rpc-bind
sudo firewall-cmd --permanent --zone=internal --add-service=mountd
sudo firewall-cmd --permanent --zone=internal --add-port=2049/udp
sudo firewall-cmd --permanent --add-port=2049/tcp
sudo firewall-cmd --permanent --add-port=111/udp
sudo firewall-cmd --permanent --add-port=111/tcp
sudo firewall-cmd --reload
.. note::
You may not have to do this because Ubuntu uses Uncomplicated Firewall (ufw)
and ufw is disabled by default.
#. Start required services for NFS:
.. code-block:: console
sudo systemctl restart firewalld
sudo systemctl start nfs-server
sudo systemctl start rpcbind.service
Ensure your system has libvirt and associated software installed and setup
correctly. For CentOS:
.. code-block:: console
sudo systemctl start libvirtd
sudo systemctl enable libvirtd
Find a location in the system's home directory and checkout Kolla repos:
.. code-block:: console
git clone https://opendev.org/openstack/kolla-cli
git clone https://opendev.org/openstack/kolla-ansible
git clone https://opendev.org/openstack/kolla
All repos must share the same parent directory so the bootstrap code can
Developers can now tweak the Vagrantfile or bring up the default **all-in-one**
CentOS 7-based environment:
.. code-block:: console
cd kolla-ansible/contrib/dev/vagrant && vagrant up
The command ``vagrant status`` provides a quick overview of the VMs composing
the environment.
Once Vagrant has completed deploying all nodes, the next step is to launch
Kolla. First, connect with the **operator** node:
.. code-block:: console
vagrant ssh operator
To speed things up, there is a local registry running on the operator. All
nodes are configured so they can use this insecure repo to pull from, and use
it as a mirror. Ansible may use this registry to pull images from.
All nodes have a local folder shared between the group and the hypervisor, and
a folder shared between **all** nodes and the hypervisor. This mapping is lost
after reboots, so make sure to use the command ``vagrant reload <node>`` when
reboots are required. Having this shared folder provides a method to supply
a different Docker binary to the cluster. The shared folder is also used to
store the docker-registry files, so they are save from destructive operations
like ``vagrant destroy``.
Building images
Once logged on the **operator** VM call the ``kolla-build`` utility:
``kolla-build`` accept arguments as documented in
:kolla-doc:`Building Container Images <admin/image-building.html>`.
It builds Docker images and pushes them to the local registry if the **push**
option is enabled (in Vagrant this is the default behaviour).
Generating passwords
--------------------
Before proceeding with the deployment you must generate the service passwords:
.. code-block:: console
kolla-genpwd
Deploying OpenStack with Kolla
------------------------------
To deploy **all-in-one**:
.. code-block:: console
sudo kolla-ansible deploy
To deploy **multinode**:
Ensure that the nodes deployed by Vagrant match those specified in the
inventory file:
``/usr/share/kolla-ansible/ansible/inventory/multinode``.
For Centos 7:
.. code-block:: console
sudo kolla-ansible deploy -i /usr/share/kolla-ansible/ansible/inventory/multinode
For Ubuntu 16.04 or later:
sudo kolla-ansible deploy -i /usr/local/share/kolla-ansible/ansible/inventory/multinode
Validate OpenStack is operational:
kolla-ansible post-deploy
export OS_CLIENT_CONFIG_FILE=/etc/kolla/clouds.yaml
Or navigate to ``http://172.28.128.254/`` with a web browser.
All Vagrant documentation can be found at
`Vagrant documentation <https://www.vagrantup.com/docs/>`_.
