functions

#!/bin/bash

set -eu
set -o pipefail

# Library of functions for the kayobe development environment.

# Configuration

function config_defaults {
    # Set default values for kayobe development configuration.

    # Try to detect if we are running in a vagrant VM.
    if [[ -e /vagrant ]]; then
        KAYOBE_SOURCE_PATH_DEFAULT=/vagrant
    else
        KAYOBE_SOURCE_PATH_DEFAULT="$(pwd)"
    fi

    # Path to the kayobe source code repository. Typically this will be the
    # Vagrant shared directory.
    export KAYOBE_SOURCE_PATH="${KAYOBE_SOURCE_PATH:-$KAYOBE_SOURCE_PATH_DEFAULT}"

    # Path to the kayobe-config repository checkout.
    export KAYOBE_CONFIG_SOURCE_PATH="${KAYOBE_CONFIG_SOURCE_PATH:-${KAYOBE_SOURCE_PATH}/config/src/kayobe-config}"

    # Path to the kayobe virtual environment.
    export KAYOBE_VENV_PATH="${KAYOBE_VENV_PATH:-${HOME}/kayobe-venv}"

    # Whether to provision a VM for the seed host.
    export KAYOBE_SEED_VM_PROVISION=${KAYOBE_SEED_VM_PROVISION:-1}

    # Whether to build container images for the seed services. If 0, they will
    # be pulled.
    export KAYOBE_SEED_CONTAINER_IMAGE_BUILD=${KAYOBE_SEED_CONTAINER_IMAGE_BUILD:-0}

    # Whether to build container images for the overcloud services. If 0, they
    # will be pulled if $KAYOBE_OVERCLOUD_CONTAINER_IMAGE_PULL is 1.
    export KAYOBE_OVERCLOUD_CONTAINER_IMAGE_BUILD=${KAYOBE_OVERCLOUD_CONTAINER_IMAGE_BUILD:-0}

    # Whether to pull container images for the overcloud services if
    # $KAYOBE_OVERCLOUD_CONTAINER_IMAGE_BUILD is 0.
    export KAYOBE_OVERCLOUD_CONTAINER_IMAGE_PULL=${KAYOBE_OVERCLOUD_CONTAINER_IMAGE_PULL:-1}

    # Whether to deploy overcloud services.
    export KAYOBE_OVERCLOUD_SERVICE_DEPLOY=${KAYOBE_OVERCLOUD_SERVICE_DEPLOY:-1}

    # Whether to perform overcloud post configuration.
    export KAYOBE_OVERCLOUD_POST_CONFIGURE=${KAYOBE_OVERCLOUD_POST_CONFIGURE:-1}

    # Additional arguments to pass to kayobe commands.
    export KAYOBE_EXTRA_ARGS=${KAYOBE_EXTRA_ARGS:-}

    # Use .gitreview as the key to determine the appropriate branch to clone
    # for tests. Inspired by OSA code.
    PARENT="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
    if [ -f "${PARENT}/../.gitreview" ]; then
      BRANCH=$(awk -F'=' '/defaultbranch/ {print $2}' "${PARENT}/../.gitreview")
      if [[ "${BRANCH}" == "" ]]; then
        SERIES="master"
      else
        SERIES="$(echo ${BRANCH} | sed 's|stable/||')"
      fi

      # Upper constraints to use when installing Python packages.
      export UPPER_CONSTRAINTS_FILE="${UPPER_CONSTRAINTS_FILE:-https://releases.openstack.org/constraints/upper/${SERIES}}"
    fi

    # Path to the Tenks virtual environment.
    export TENKS_VENV_PATH="${TENKS_VENV_PATH:-${HOME}/tenks-test-venv}"

    # Path to a Tenks YAML configuration file. If unset,
    # tenks-deploy-config-overcloud.yml or tenks-deploy-config-compute.yml will
    # be used.
    export TENKS_CONFIG_PATH=${TENKS_CONFIG_PATH:-}

    # Log directory in case of errors
    export LOGDIR=${LOGDIR:-}
}

function config_set {
    # Source the configuration file, config.sh

    PARENT="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"

    source "${PARENT}/config.sh"
}

function config_check {
    # Check the configuration environment variables.

    if [[ ! -e "$KAYOBE_CONFIG_SOURCE_PATH" ]]; then
        if [[ ${KAYOBE_CONFIG_REQUIRED:-1} -eq 1 ]]; then
            echo "Kayobe configuration path $KAYOBE_CONFIG_SOURCE_PATH does not exist"
            return 1
        fi
    fi

    if [[ ! -e "$KAYOBE_SOURCE_PATH" ]]; then
        echo "Kayobe source path $KAYOBE_SOURCE_PATH does not exist"
        return 1
    fi
}

function config_init {
    config_defaults
    config_set
    config_check
}

# Installation

function is_dnf {
    if [[ -e /etc/centos-release ]]; then
        which dnf >/dev/null 2>&1
    else
        return 1
    fi
}

function is_yum {
    if [[ -e /etc/centos-release ]]; then
        which yum >/dev/null 2>&1
    else
        return 1
    fi
}

function install_dependencies {
    echo "Installing package dependencies for kayobe"
    if is_dnf; then
        sudo dnf -y install gcc git vim python3-pyyaml python3-virtualenv libffi-devel
    elif is_yum; then
        echo "CentOS 7 is no longer supported"
        exit 1
    else
        sudo apt install -y python-dev python3-virtualenv gcc git libffi-dev
    fi
}

function install_venv {
    # Install a virtualenv at $1. The rest of the arguments are passed
    # directly to pip.
    venv_path="$1"
    shift
    pip_paths="$@"
    local venv_parent="$(dirname ${venv_path})"
    if [[ ! -d "$venv_parent" ]]; then
        mkdir -p "$venv_parent"
    fi
    if [[ ! -f "${venv_path}/bin/activate" ]]; then
        echo "Creating virtual environment in ${venv_path}"
        virtualenv -p python3 "${venv_path}"
        # NOTE: Virtualenv's activate and deactivate scripts reference an
        # unbound variable.
        set +u
        source "${venv_path}/bin/activate"
        pip install -U pip
        pip install $pip_paths
        deactivate
        set -u
    else
        echo "Using existing virtual environment in ${venv_path}"
    fi
}

function install_kayobe_venv {
    # Install the Kayobe venv.
    install_venv "${KAYOBE_VENV_PATH}" "${KAYOBE_SOURCE_PATH}"
}

function install_kayobe_dev_venv {
    # Install Kayobe in the venv in editable mode.
    install_venv "${KAYOBE_VENV_PATH}" -e "${KAYOBE_SOURCE_PATH}"
}

function upgrade_kayobe_venv {
    echo "Upgrading kayobe virtual environment in ${KAYOBE_VENV_PATH}"
    virtualenv -p python3 "${KAYOBE_VENV_PATH}"
    # NOTE: Virtualenv's activate and deactivate scripts reference an
    # unbound variable.
    set +u
    source "${KAYOBE_VENV_PATH}/bin/activate"
    pip install -U pip
    pip install -U "${KAYOBE_SOURCE_PATH}"
    deactivate
    set -u
}

# Deployment

function is_deploy_image_built_locally {
    ipa_build_images=$(kayobe configuration dump --host controllers[0] --var-name ipa_build_images)
    [[ $ipa_build_images =~ ^true$ ]]
}

function environment_setup {
    # NOTE: Virtualenv's activate script references an unbound variable.
    set +u
    source "${KAYOBE_VENV_PATH}/bin/activate"
    set -u
    source "${KAYOBE_CONFIG_SOURCE_PATH}/kayobe-env"
}

function run_kayobe {
    # Run a kayobe command, including extra arguments provided via
    # $KAYOBE_EXTRA_ARGS.
    kayobe ${KAYOBE_EXTRA_ARGS} $*
}

function control_host_bootstrap {
    echo "Bootstrapping the Ansible control host"
    for i in $(seq 1 3); do
        if run_kayobe control host bootstrap; then
            chb_success=1
            break
        fi
        echo "Control host bootstrap failed - likely Ansible Galaxy flakiness. Retrying"
    done
    if [[ -z ${chb_success+x} ]]; then
        die $LINENO "Failed to bootstrap control host"
        exit 1
    fi
    echo "Bootstrapped control host after $i attempts"
}

function control_host_upgrade {
    echo "Upgrading the Ansible control host"
    for i in $(seq 1 3); do
        if run_kayobe control host upgrade; then
            chu_success=1
            break
        fi
        echo "Control host upgrade failed - likely Ansible Galaxy flakiness. Retrying"
    done
    if [[ -z ${chu_success+x} ]]; then
        die $LINENO "Failed to upgrade control host"
        exit 1
    fi
    echo "Upgraded control host after $i attempts"
}

function seed_hypervisor_deploy {
    # Deploy a seed hypervisor.
    environment_setup

    echo "Bootstrapping the Ansible control host"
    run_kayobe control host bootstrap

    echo "Configuring the seed hypervisor"
    run_kayobe seed hypervisor host configure
}

function seed_deploy {
    # Deploy a kayobe seed in a VM.
    environment_setup

    control_host_bootstrap

    if [[ ${KAYOBE_SEED_VM_PROVISION} = 1 ]]; then
        echo "Provisioning the seed VM"
        run_kayobe seed vm provision
    fi

    echo "Configuring the seed host"
    run_kayobe seed host configure

    # Note: This must currently be done before host configure, because host
    # configure runs kolla-ansible.yml, which validates the presence of the
    # built deploy images.
    if is_deploy_image_built_locally; then
        echo "Building seed deployment images"
        run_kayobe seed deployment image build
    else
        echo "Not building seed deployment images"
    fi

    if [[ ${KAYOBE_SEED_CONTAINER_IMAGE_BUILD} = 1 ]]; then
        echo "Building seed container images"
        run_kayobe seed container image build
    else
        echo "Not pulling seed container images - no such command yet"
        #run_kayobe seed container image pull
    fi

    echo "Deploying containerised seed services"
    run_kayobe seed service deploy
}

function seed_upgrade {
    # Upgrade a kayobe seed in a VM.
    echo "Upgrading Kayobe"
    upgrade_kayobe_venv

    environment_setup

    control_host_upgrade

    echo "Upgrading the seed host"
    run_kayobe seed host upgrade

    if is_deploy_image_built_locally; then
        echo "Building seed deployment images"
        run_kayobe seed deployment image build --force-rebuild
    else
        echo "Not building seed deployment images"
    fi

    if [[ ${KAYOBE_SEED_CONTAINER_IMAGE_BUILD} = 1 ]]; then
        echo "Building seed container images"
        run_kayobe seed container image build
    else
        echo "Not pulling seed container images - no such command yet"
        #run_kayobe seed container image pull
    fi

    echo "Upgrading containerised seed services"
    run_kayobe seed service upgrade
}

function overcloud_deploy {
    # Deploy a kayobe control plane.
    echo "Deploying a kayobe development environment. This consists of a "
    echo "single node OpenStack control plane."

    environment_setup

    control_host_bootstrap

    echo "Configuring the controller host"
    run_kayobe overcloud host configure

    # FIXME(mgoddard): Perform host upgrade workarounds to ensure hostname
    # resolves to IP address of API interface for RabbitMQ. This seems to be
    # required since https://review.openstack.org/#/c/584427 was merged.
    echo "Workaround: upgrading the controller host"
    run_kayobe overcloud host upgrade

    # Note: This must currently be before host configure, because host
    # configure runs kolla-ansible.yml, which validates the presence of the
    # built deploy images.
    if is_deploy_image_built_locally; then
        echo "Building overcloud deployment images"
        run_kayobe overcloud deployment image build
    else
        echo "Not building overcloud deployment images"
    fi

    if [[ ${KAYOBE_OVERCLOUD_CONTAINER_IMAGE_BUILD} = 1 ]]; then
        echo "Building overcloud container images"
        run_kayobe overcloud container image build
    elif [[ ${KAYOBE_OVERCLOUD_CONTAINER_IMAGE_PULL} = 1 ]]; then
        echo "Pulling overcloud container images"
        run_kayobe overcloud container image pull
    fi

    if [[ ${KAYOBE_OVERCLOUD_SERVICE_DEPLOY} = 1 ]]; then
        echo "Deploying containerised overcloud services"
        run_kayobe overcloud service deploy
    fi

    if [[ ${KAYOBE_OVERCLOUD_POST_CONFIGURE} = 1 ]]; then
        echo "Performing post-deployment configuration"
        source "${KOLLA_CONFIG_PATH:-/etc/kolla}/admin-openrc.sh"
        run_kayobe overcloud post configure
    fi

    echo "Control plane deployment complete"
}

function overcloud_upgrade {
    # Upgrade a kayobe control plane.
    echo "Upgrading a kayobe development environment. This consists of a "
    echo "single node OpenStack control plane."

    echo "Upgrading Kayobe"
    upgrade_kayobe_venv

    environment_setup

    control_host_upgrade

    echo "Upgrading the controller host"
    run_kayobe overcloud host upgrade

    if is_deploy_image_built_locally; then
        echo "Building overcloud deployment images"
        run_kayobe overcloud deployment image build --force-rebuild
    else
        echo "Not building overcloud deployment images"
    fi

    if [[ ${KAYOBE_OVERCLOUD_CONTAINER_IMAGE_BUILD} = 1 ]]; then
        echo "Building overcloud container images"
        run_kayobe overcloud container image build
    else
        echo "Pulling overcloud container images"
        run_kayobe overcloud container image pull
    fi

    echo "Saving overcloud service configuration"
    # Don't copy the ironic IPA kernel and ramdisk, since these files can be
    # quite large.
    run_kayobe overcloud service configuration save --exclude 'ironic-agent.*'

    echo "Deploying containerised overcloud services"
    run_kayobe overcloud service upgrade

    echo "Control plane upgrade complete"
}

function overcloud_test_init {

    echo "Performing overcloud test init"
    environment_setup

    if [[ ! -z "$UPPER_CONSTRAINTS_FILE" ]]; then
        pip install python-openstackclient -c "$UPPER_CONSTRAINTS_FILE"
    else
        pip install python-openstackclient
    fi
    source "${KOLLA_CONFIG_PATH:-/etc/kolla}/admin-openrc.sh"

    # This guards init-runonce from running more than once
    if mkdir /tmp/init-runonce > /dev/null 2>&1; then
        echo "Running kolla-ansible init-runonce"
        # Don't create an external network, since it conflicts with the ironic
        # provision-net.
        export ENABLE_EXT_NET=0
        ${KOLLA_VENV_PATH:-$HOME/kolla-venv}/share/kolla-ansible/init-runonce
        unset ENABLE_EXT_NET

        # Allow provision-net to be used as an external network for floating IPs.
        # Note: a provisioning network would not normally be external.
        openstack network set provision-net --external
        openstack router set demo-router --external-gateway provision-net
    else
        echo "Not running kolla-ansible init-runonce - resources exist"
    fi
}

function overcloud_test {
    set -eu

    # function arguments
    name="$1"
    flavor="$2"
    network="$3"

    node_config="{ 'name': '$name', 'flavor': '$flavor', 'network': '$network' }"

    overcloud_test_init

    # Perform a simple smoke test against the cloud.
    echo "Performing a simple smoke test with node config: $node_config"

    echo "$name: Creating a server"
    openstack server create --wait --image cirros --flavor "$flavor" --key-name mykey --network "$network" "$name"
    echo "$name: Server created"
    openstack server show "$name"
    status=$(openstack server show "$name" -f value -c status)
    if [[ $status != ACTIVE ]]; then
        echo "$name: Node creation failed"
        return 1
    fi

    # Test SSH connectivity. For servers attached directly to the external
    # network, use the fixed IP. Otherwise add a floating IP.
    if [[ $network = provision-net ]]; then
        ip=$(openstack server show "$name" -f value -c addresses | sed -e "s/${network}=//")
    else
        echo "$name: Attaching floating IP"
        ip=$(openstack floating ip create provision-net -f value -c floating_ip_address)
        openstack server add floating ip ${name} ${ip}
    fi
    echo "$name: Waiting for ping and SSH access via ${ip}"
    attempts=6
    for i in $(seq 1 $attempts); do
        if ping -c1 -W1 $ip && ssh -v -o StrictHostKeyChecking=no -o BatchMode=yes cirros@$ip hostname; then
            break
        elif [[ $i -eq $attempts ]]; then
            echo "Failed to access server $name via SSH after $attempts attempts"
            return 1
        else
            echo "Cannot access server $name - retrying"
        fi
        sleep 10
    done
    echo "$name: Ping and SSH successful"
    if [[ $network != provision-net ]]; then
        echo "$name: Removing floating IP"
        openstack server remove floating ip ${name} ${ip}
        openstack floating ip delete ${ip}
    fi

    echo "$name: Deleting the Node"
    openstack server delete --wait "$name"
}

function write_bifrost_clouds_yaml {
    # Generate a clouds.yaml for accessing the Ironic API in Bifrost.
    if [[ ! -f ~/.config/openstack/clouds.yaml ]]; then
        mkdir -p ~/.config/openstack
        cat << EOF > ~/.config/openstack/clouds.yaml
---
clouds:
  bifrost:
    auth_type: "none"
    endpoint: http://192.168.33.5:6385
EOF
    fi
}

function run_tenks_playbook {
    # Run a Tenks playbook. Arguments:
    # $1: The path to the Tenks repo.
    # $2: The name of the playbook to run.
    local tenks_path="$1"
    local tenks_playbook="$2"
    local tenks_deploy_type="${3:-default}"

    local parent="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"

    if [[ ! -f "${KOLLA_CONFIG_PATH:-/etc/kolla}/admin-openrc.sh" &&
              "${tenks_deploy_type}" = "compute" ]]; then

        die $LINENO "Missing admin-openrc.sh & tenks_deploy_type is compute."
        exit 1
    fi
    if [[ -f "${KOLLA_CONFIG_PATH:-/etc/kolla}/admin-openrc.sh" &&
              ( "${tenks_deploy_type}" = "default" ||
                    "${tenks_deploy_type}" = "compute" ) ]]; then

        # Deploys Compute from Overcloud
        default_tenks_config=tenks-deploy-config-compute.yml
        source "${KOLLA_CONFIG_PATH:-/etc/kolla}/admin-openrc.sh"

    elif [[ "${tenks_deploy_type}" = "default" ||
               "${tenks_deploy_type}" = "overcloud" ]]; then

        # Deploys Overcloud from Seed
        default_tenks_config=tenks-deploy-config-overcloud.yml
        write_bifrost_clouds_yaml
        export OS_CLOUD=bifrost

    else
        die $LINENO "Bad tenks_deploy_type: ${tenks_deploy_type}"
        exit 1
    fi

    # Allow a specific Tenks config file to be specified via
    # $TENKS_CONFIG_PATH.
    tenks_config="${TENKS_CONFIG_PATH:-$parent/$default_tenks_config}"

    ansible-playbook \
        -vvv \
        --inventory "$tenks_path/ansible/inventory" \
        --extra-vars=@"$tenks_config" \
        "$tenks_path/ansible/$tenks_playbook"
}

function tenks_deploy {
    set -eu
    # Create a simple test Tenks deployment. Assumes that a bridge named
    # 'breth1' exists.  Arguments:
    # $1: The path to the Tenks repo.
    local tenks_path="$1"
    local tenks_deploy_type="${2:-default}"

    echo "Configuring Tenks"

    environment_setup

    # We don't want to use the Kayobe venv.
    deactivate

    # Install the Tenks venv.
    install_venv "${TENKS_VENV_PATH}" "$tenks_path" -c "$UPPER_CONSTRAINTS_FILE"
    source ${TENKS_VENV_PATH:-$HOME/tenks-test-venv}/bin/activate

    ${KAYOBE_SOURCE_PATH}/tools/ansible-galaxy-retried.sh install \
        --role-file="$tenks_path/requirements.yml" \
        --roles-path="$tenks_path/ansible/roles/"

    local parent="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"

    # Install a trivial script for ovs-vsctl that talks to containerised Open
    # vSwitch.
    sudo cp --no-clobber "$parent/ovs-vsctl" /usr/bin/ovs-vsctl

    run_tenks_playbook "$tenks_path" deploy.yml "$tenks_deploy_type"
}

function tenks_teardown {
    set -eu
    # Tear down a test Tenks deployment.
    # Arguments:
    # $1: The path to the Tenks repo.
    local tenks_path="$1"
    local tenks_deploy_type="${2:-default}"

    echo "Tearing down Tenks"

    environment_setup

    # We don't want to use the Kayobe venv.
    deactivate

    # Source the Tenks venv.
    source ${TENKS_VENV_PATH:-$HOME/tenks-test-venv}/bin/activate

    run_tenks_playbook "$tenks_path" teardown.yml "$tenks_deploy_type"
}

# General purpose

# Prints backtrace info
# filename:lineno:function
# backtrace level
function backtrace {
    local level=$1
    local deep
    deep=$((${#BASH_SOURCE[@]} - 1))
    echo "[Call Trace]"
    while [ $level -le $deep ]; do
        echo "${BASH_SOURCE[$deep]}:${BASH_LINENO[$deep-1]}:${FUNCNAME[$deep-1]}"
        deep=$((deep - 1))
    done
}

# Prints line number and "message" then exits
# die $LINENO "message"
function die {
    local exitcode=$?
    set +o xtrace
    local line=$1; shift
    if [ $exitcode == 0 ]; then
        exitcode=1
    fi
    backtrace 2
    err $line "$*"
    # Give buffers a second to flush
    sleep 1
    exit $exitcode
}


# Prints line number and "message" in error format
# err $LINENO "message"
function err {
    local exitcode=$?
    local xtrace
    xtrace=$(set +o | grep xtrace)
    set +o xtrace
    local msg="[ERROR] ${BASH_SOURCE[2]}:$1 $2"
    echo "$msg" 1>&2;
    if [[ -n ${LOGDIR} ]]; then
        echo "$msg" >> "${LOGDIR}/error.log"
    fi
    $xtrace
    return $exitcode
}


function die_if_module_not_loaded {
    if ! grep -q $1 /proc/modules; then
        die $LINENO "$1 kernel module is not loaded"
    fi
}

# running_in_container - Returns true otherwise false
function running_in_container {
    [[ $(systemd-detect-virt --container) != 'none' ]]
}

# enable_kernel_bridge_firewall - Enable kernel support for bridge firewalling
function enable_kernel_bridge_firewall {
    # Load bridge module. This module provides access to firewall for bridged
    # frames; and also on older kernels (pre-3.18) it provides sysctl knobs to
    # enable/disable bridge firewalling
    sudo modprobe bridge
    # For newer kernels (3.18+), those sysctl settings are split into a separate
    # kernel module (br_netfilter). Load it too, if present.
    sudo modprobe br_netfilter 2>> /dev/null || :
    # Enable bridge firewalling in case it's disabled in kernel (upstream
    # default is enabled, but some distributions may decide to change it).
    # This is at least needed for RHEL 7.2 and earlier releases.
    for proto in ip ip6; do
        sudo sysctl -w net.bridge.bridge-nf-call-${proto}tables=1
    done
}

function to_bool {
    if [[ "$1" =~ (y|Y|yes|Yes|YES|true|True|TRUE|on|On|ON) ]]; then
        true
    elif [[ "$1" =~ (n|N|no|No|NO|false|False|FALSE|off|Off|OFF) ]]; then
        false
    else
        die $LINENO "$1 was not a valid yaml boolean"
    fi
}

function is_ipxe_enabled {
    flag="$(run_kayobe configuration dump --host controllers[0] --var-name kolla_enable_ironic_ipxe)"
    to_bool "$flag"
}

function is_cinder_enabled {
    flag="$(run_kayobe configuration dump --host controllers[0] --var-name kolla_enable_cinder)"
    to_bool "$flag"
}

function configure_iptables {
    # NOTE(wszumski): adapted from the ironic devstack plugin, see:
    # https://github.com/openstack/ironic/blob/36e87dc5b472d79470b783fbba9ce396e3cbb96e/devstack/lib/ironic#L2132

    set -eu
    environment_setup

    # FIXME(wszumski): set these variables with values from kayobe-config
    HOST_IP='192.168.33.3'
    INTERNAL_VIP='192.168.33.2'
    IRONIC_TFTPSERVER_IP="$HOST_IP"
    IRONIC_SERVICE_PORT=6385
    IRONIC_INSPECTOR_PORT=5050
    IRONIC_HTTP_SERVER="$INTERNAL_VIP"
    GLANCE_SERVICE_PORT=9292
    IRONIC_HTTP_PORT=8089
    ISCSI_SERVICE_PORT=3260

    # enable tftp natting for allowing connections to HOST_IP's tftp server
    if ! running_in_container; then
        sudo modprobe nf_conntrack_tftp
        sudo modprobe nf_nat_tftp

        enable_kernel_bridge_firewall
    else
        die_if_module_not_loaded nf_conntrack_tftp
        die_if_module_not_loaded nf_nat_tftp
    fi
    # explicitly allow DHCP - packets are occasionally being dropped here
    sudo iptables -I INPUT -p udp --dport 67:68 --sport 67:68 -j ACCEPT || true
    # nodes boot from TFTP and callback to the API server listening on $HOST_IP
    sudo iptables -I INPUT -d $IRONIC_TFTPSERVER_IP -p udp --dport 69 -j ACCEPT || true

    sudo iptables -I INPUT -d $HOST_IP -p tcp --dport $IRONIC_SERVICE_PORT -j ACCEPT || true
    # open ironic API on baremetal network
    sudo iptables -I INPUT -d $IRONIC_HTTP_SERVER -p tcp --dport $IRONIC_SERVICE_PORT -j ACCEPT || true

    # Docker CE has added a default DROP policy to the FORWARD chain.
    # When nova-compute runs on the controller, kolla ansible sets the
    # net.bridge.bridge-nf-call-iptables sysctl to 1, which causes iptables to
    # process frames forwarded across bridges. Forward all frames on the main
    # bridge, breth1.
    sudo iptables -A FORWARD -i breth1 -j ACCEPT || true

    # agent ramdisk gets instance image from swift
    sudo iptables -I INPUT -d $INTERNAL_VIP -p tcp --dport ${SWIFT_DEFAULT_BIND_PORT:-8080} -j ACCEPT || true
    sudo iptables -I INPUT -d $INTERNAL_VIP -p tcp --dport $GLANCE_SERVICE_PORT -j ACCEPT || true

    if is_ipxe_enabled; then
        sudo iptables -I INPUT -d $HOST_IP -p tcp --dport $IRONIC_HTTP_PORT -j ACCEPT || true
    fi

    if is_cinder_enabled; then
        sudo iptables -I INPUT -d $HOST_IP -p tcp --dport $ISCSI_SERVICE_PORT -j ACCEPT || true
    fi
}