The use of default(omit) is for module parameters, not templates. We
define a default value for openstack_cacert, so it should never be
undefined anyway.

Change-Id: Idfa73097ca168c76559dc4f3aa8bb30b7113ab28

The support of hyperv was deprecated.

Change-Id: I3e1ca3ac0a8bac8ba68911ffb4925c5a474f24dd

When kolla_copy_ca_into_containers is set to "yes", the Certificate
Authority in /etc/kolla/certificates will be copied into service
containers to enable trust for that CA. This is especially useful when
the CA is self signed, and would not be trusted by default.

Partially-Implements: blueprint custom-cacerts

Change-Id: I4368f8994147580460ebe7533850cf63a419d0b4

Include a reference to the globally configured Certificate Authority to
all services. Services use the CA to verify HTTPs connections.

Change-Id: I38da931cdd7ff46cce1994763b5c713652b096cc
Partially-Implements: blueprint support-trusted-ca-certificate-file

Introduce kolla_address filter.
Introduce put_address_in_context filter.

Add AF config to vars.

Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]

Other changes:

globals.yml - mention just IP in comment

prechecks/port_checks (api_intf) - kolla_address handles validation

3x interface conditional (swift configs: replication/storage)

2x interface variable definition with hostname
(haproxy listens; api intf)

1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)

neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network

basic multinode source CI job for IPv6

prechecks for rabbitmq and qdrouterd use proper NSS database now

MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)

Ceph naming workaround in CI
TODO: probably needs documenting

RabbitMQ IPv6-only proto_dist

Ceph ms switch to IPv6 mode

Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)

haproxy upgrade checks for slaves based on ipv6 addresses

TODO:

ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.

ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.

rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.

ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.

KNOWN ISSUES (beyond us):

One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN

RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982

For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227

Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689



Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>

The meta is missing, this PS to add it

Change-Id: Ib7e39820a48659202ddd1c1f91b2e8c3f0529443

After all of the discussions we had on
"https://review.opendev.org/#/c/670626/2", I studied all projects that
have an "oslo_messaging" section. Afterwards, I applied the same method
that is already used in "oslo_messaging" section in Nova, Cinder, and
others. This guarantees that we have a consistent method to
enable/disable notifications across projects based on components (e.g.
Ceilometer) being enabled or disabled. Here follows the list of
components, and the respective changes I did.

* Aodh:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.

* Congress:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.

* Cinder:
It was already properly configured.

* Octavia:
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.

* Heat:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Ceilometer:
Ceilometer publishes some messages in the rabbitMQ. However, the
default driver is "messagingv2", and not ''(empty) as defined in Oslo;
these configurations are defined in ceilometer/publisher/messaging.py.
Therefore, we do not need to do anything for the
"oslo_messaging_notifications" section in Ceilometer

* Tacker:
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Neutron:
It was already properly configured.

* Nova
It was already properly configured. However, we found another issue
with its configuration. Kolla-ansible does not configure nova
notifications as it should. If 'searchlight' is not installed (enabled)
the 'notification_format' should be 'unversioned'. The default is
'both'; so nova will send a notification to the queue
versioned_notifications; but that queue has no consumer when
'searchlight' is disabled. In our case, the queue got 511k messages.
The huge amount of "stuck" messages made the Rabbitmq cluster
unstable.

https://bugzilla.redhat.com/show_bug.cgi?id=1478274
https://bugs.launchpad.net/ceilometer/+bug/1665449

* Nova_hyperv:
I added the same configurations as in Nova project.

* Vitrage
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Searchlight
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.

* Ironic
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.

* Glance
It was already properly configured.

* Trove
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Blazar
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Sahara
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Watcher
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.

* Barbican
I created a mechanism similar to what we have in Cinder, Nova,
and others. I also added a configuration to 'keystone_notifications'
section. Barbican needs its own queue to capture events from Keystone.
Otherwise, it has an impact on Ceilometer and other systems that are
connected to the "notifications" default queue.

* Keystone
Keystone is the system that triggered this work with the discussions
that followed on https://review.opendev.org/#/c/670626/2

. After a long
discussion, we agreed to apply the same approach that we have in Nova,
Cinder and other systems in Keystone. That is what we did. Moreover, we
introduce a new topic "barbican_notifications" when barbican is
enabled. We also removed the "variable" enable_cadf_notifications, as
it is obsolete, and the default in Keystone is CADF.

* Mistral:
It was hardcoded "noop" as the driver. However, that does not seem a
good practice. Instead, I applied the same standard of using the driver
and pushing to "notifications" queue if Ceilometer is enabled.

* Cyborg:
I created a mechanism similar to what we have in AODH, Cinder, Nova,
and others.

* Murano
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Senlin
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Manila
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Zun
The section is declared, but it is not used. Therefore, it will
be removed in an upcomming PR.

* Designate
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

* Magnum
It was already using a similar scheme; I just modified it a little bit
to be the same as we have in all other components

Closes-Bug: #1838985

Change-Id: I88bdb004814f37c81c9a9c4e5e491fac69f6f202
Signed-off-by: Rafael Weingärtner <rafael@apache.org>

We're duplicating code to build the keystone URLs in nearly every
config, where we've already done it in group_vars. Replace the
redundancy with a variable that does the same thing.

Change-Id: I207d77870e2535c1cdcbc5eaf704f0448ac85a7a

This allows neutron service endpoints to use custom hostnames, and adds the
following variables:

* neutron_internal_fqdn
* neutron_external_fqdn

These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.

This also adds a neutron_server_listen_port option, which defaults to
neutron_server_port for backward compatibility.

This option allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.

Change-Id: I87d7387326b6eaa6adae1600b48d480319d10676
Implements: blueprint service-hostnames

This allows glance service endpoints to use custom hostnames, and adds the
following variables:

* glance_internal_fqdn
* glance_external_fqdn

These default to the old values of kolla_internal_fqdn or
kolla_external_fqdn.

This also adds a glance_api_listen_port option, which defaults to
glance_api_port for backward compatibility.

This option allow the user to differentiate between the port the
service listens on, and the port the service is reachable on. This is
useful for external load balancers which live on the same host as the
service itself.

Change-Id: Icb91f728533e2db1908b23dabb0501cf9f8a2b75
Implements: blueprint service-hostnames

With this change, an operator may be able to stop a
service container without stopping all services in a host.
This change is the starting point to start
fast-forward upgrades support.
In next changes new flags will be introducced to disable
stop dataplane services during upgrades.

Change-Id: Ifde7a39d7d8596ef0d7405ecf1ac1d49a459d9ef
Implements: blueprint support-stop-containers

Change-Id: I0cbc51eedb218f6b2f7d5c50372ad7a8be9bdcc0

include is marked as deprecated since ansible 2.4[0]

[0] https://docs.ansible.com/ansible/2.4/include_module.html#deprecated



Co-Authored-By: confi-surya <singh.surya64mnnit@gmail.com>
Change-Id: Ic9d71e1865d1c728890625aeddf424a5734c0a8a

- rename action and serial to kolla_ansible and kolla_serial
- use become instead of "sudo <command>" in shell
- Remove quota for failed_when and changed_when in rabbitmq tasks

Change-Id: I78cb60168aaa40bb6439198283546b7faf33917c
Implements: blueprint migrate-to-ansible-2-2-0

This commit separates the messaging rpc and notify transports in order
to support separate and different oslo.messaging backends

This patch:
* add rpc and notify variables
* update service role conf templates
* add example to globals.yaml
* add release note

Implements: blueprint hybrid-messaging
Change-Id: I34691c2895c8563f1f322f0850ecff98d11b5185

This is required by routed provider networks.

Change-Id: I529c310c5119e68343114dc1ef12d7d8cc7e2ce1

Closes-Bug: #1720777
Change-Id: Iebc619cea158685077928b54cb5c9332427bc596

HyperV Nova needs some nova.conf changes to work properly.
More precisely: 'auth_plugin' becomes 'auth_type'.

Closes-Bug: #1716956
Change-Id: Ic2342e2303b780398f81b3024fe5b11111e34a6e

Console access for HyperV VMs is now done via Kolla VIP.
The VIP will point to each HyperV compute node IP on which
FreeRDP-WebConnect is installed.

Closes-Bug: #1714249
Change-Id: I3a5d23425996a5c347ff21df3f99c3f63dd35173

As described here:
https://github.com/openstack/keystone/blob/master/keystone/resource/core.py#L841
https://github.com/openstack/keystone/blob/master/keystone/conf/identity.py#L21

* default project domain name MUST be named 'Default'
* default project domain id MUST be named 'default'
* default project user name MUST be named 'Default'
* default project user id MUST be named 'default'

Change-Id: I610a0416647fdea31bb04889364da5395d8c8d74

Implement an ansible role that adds Hyper-V as a compute node for
OpenStack using Kolla.

This will install and configure the Nova Compute service, the
Hyper-V Neutron agent and FreeRDP-WebConnect.
https://docs.openstack.org/ocata/config-reference/compute/hypervisor-hyper-v.html



Change-Id: I601835b0769c5ff173a980a05a752391ae8cc82f
Implements: blueprint hyperv-ansible-role
Co-Authored-By: Alessandro Pilotti <apilotti@cloudbasesolutions.com>