Change-Id: I8855bd60c2fd77f33fb55d4123131a94327bd166

Their cleanup has been added to monasca cleanup command.

Change-Id: I19a846e2683ae70b33ca64d2aba7ac71eb724588

This change replaces ElasticSearch with OpenSearch, and Kibana
with OpenSearch Dashboards. It migrates the data from ElasticSearch
to OpenSearch upon upgrade.

No TLS support is in this patch (will be a followup).

A replacement for ElasticSearch Curator will be added as a followup.

Depends-On: https://review.opendev.org/c/openstack/kolla/+/830373



Co-authored-by: Doug Szumski <doug@stackhpc.com>
Co-authored-by: Kyle Dean <kyle@stackhpc.com>
Change-Id: Iab10ce7ea5d5f21a40b1f99b28e3290b7e9ce895

Kolla Ansible is switching to OpenSearch and is dropping support for
deploying ElasticSearch. This is because the final OSS release of
ElasticSearch has exceeded its end of life.

Monasca is affected because it uses both Logstash and ElasticSearch.
Whilst it may continue to work with OpenSearch, Logstash remains an
issue.

In the absence of any renewed interest in the project, we remove
support for deploying it. This helps to reduce the complexity
of log processing configuration in Kolla Ansible, freeing up
development time.

Change-Id: I6fc7842bcda18e417a3fd21c11e28979a470f1cf

From OpenStack Zed the Pure Storage Cinder driver supports
NVMe-RoCE as a dataplane protocol. This patch adds support
for this new driver type.

Also amend a couple of documentation formatting typos.

Change-Id: Ic1eed7d19e9b583e22419625c92ac3507ea4614d

First part of patchset:
 https://review.opendev.org/c/openstack/kolla-ansible/+/799229/


in which was suggested to split patch into smaller ones.

This implements kolla_container_engine variable
in command calls of docker,so later on it can be
also used for podman without further change.

Signed-off-by: Ivan Halomi <i.halomi@partner.samsung.com>
Change-Id: Ic30b67daa2e215524096ad1f4385c569e3d41b95

We agreed that CentOS Stream 9 images are not published as we keep it
for CI use only (to check potential failures before it hits RHEL).

We recommend Rocky Linux 9 instead.

Change-Id: I06e6746e5c2abbdcd97912ea2f99d82fc662531d

Some time ago we dropped RHEL as one of possible options. During 'Zed'
cycle we added Rocky Linux 9 as alternative to CentOS Stream 9.

This change updates some mentions of both.

Change-Id: I9ed93efcb7d1ff97b1c7d8342db8252aba2a9887

Kolla Ansible now supports failing execution early if fact collection
fails on any of the hosts. This is to avoid late failures due to missing
facts (especially cross-host).

Change-Id: I7a74b937ded0b9da0621cf413f3a5d0d13a2cd68
Partial-Bug: #1833737

This can be used to forward Prometheus Alertmanager notifications to
Microsoft Teams.

Change-Id: I563f2438b3cb0895606b029b5269ce2e50c413e3
Depends-On: https://review.opendev.org/c/openstack/kolla/+/812678

This patch follows upstream and disables linuxbridge testing.
Users are notified of the situation via the release note.

Change-Id: I524682ceb5287c14ef0ba99baae0c081850f4c5e

Kolla environment currently uses haproxy
to fullfill HA in mariadb. This patch
is switching haproxy to proxysql if enabled.

This patch is also replacing mariadb's user
'haproxy' with user 'monitor'. This replacement
has two reasons:
  - Use better name to "monitor" galera claster
    as there are two services using this user
    (HAProxy, ProxySQL)
  - Set password for monitor user as it's
    always better to use password then not use.
    Previous haproxy user didn't use password
    as it was historically not possible with
    haproxy and mariadb-clustercheck wasn't
    implemented.

Depends-On: https://review.opendev.org/c/openstack/kolla/+/769385
Depends-On: https://review.opendev.org/c/openstack/kolla/+/765781
Depends-On: https://review.opendev.org/c/openstack/kolla/+/850656

Change-Id: I0edae33d982c2e3f3b5f34b3d5ad07a431162844

This change introduces automated configuration of firewalld and adds
a new filter for extracting services from the project_services dict.
the filter selects any enabled services and their haproxy element
and returns them so they can be iterated over.
This commit also enables automated configuration of firewalld from enabled
openstack services and adds them to the defined zone and reloads the
system firewall.

Change-Id: Iea3680142711873984efff2b701347b6a56dd355

Change-Id: I63673761959a560e97c848f092f086ceba25839a

This reverts commit 73fc230f.

Reason for revert: CI jobs failing with "msg": "{{ s3_url }}: 's3_url' is undefined"

Change-Id: Iba7099988cea0c0d8254b9e202309cd9c82a984d

Added options to configure S3 cinder backup driver, so cinder backup
can use S3 storage, for safekeeping backups.

Change-Id: Id6ff6206714581555baacecebfb6d8dd53bed8ac

Closes-bug: 1944699
Change-Id: I6d0bb3b88983846fdd9c8af09456a106a940d191

Change-Id: Iaf6bf36ae0adce3342981c36c859fc138b172f6b

In the last PTG it was decided to drop the keystone_token_provider variable, because there is no other option anymore.

Signed-off-by: Ramona Rautenberg <rautenberg@osism.tech>
Change-Id: I1ee2c3f9b7dbbbf4633c5874cdbb3c4f8c09e277

Add an enable_cinder_backend_pure_iscsi and
enable_cinder_backend_pure_fc options to etc/kolla/globals.yml
to enable use of the FlashArray backend.
Update the documentation to include a section on configuring
Cinder with the FlashArray.

Implements: blueprint pure-cinder-driver
Change-Id: I464733f1322237321ed1ffff8636cf30bd1cbb38

Ansible objects when given an empty YAML file, adding dummy var.

Closes-Bug: #1970638
Change-Id: I1f2f3ce7387caabffbb04ef5b3a07d634bb7e1bc

Change-Id: Ide82b7a7fa6752b60f2c9c31cdc4c79183fc62f6

We have only one value for install_type now and it gets removed from
image names.

Change-Id: I8bf95fd7aa9dd26b80d618ca0fcb097003b4cb0a

Add a new parameter 'ironic_dnsmasq_dhcp_ranges' and enable the
configuration of the corresponding 'dhcp-range' and 'dhcp-option'
blocks in Ironic Inspector dnsmasq for multiple ranges.

The old parameters 'ironic_dnsmasq_dhcp_range' and
'ironic_dnsmasq_default_gateway' used for the only range are now
removed.

This change implements the same solution used in the TripleO several
years ago in the: Ie49b07ffe948576f5d9330cf11ee014aef4b282d

Also, this change contains: Iae15e9db0acc2ecd5b087a9ca430be948bc3e649
fix for lease time.
The value can be changed globally or per range.

Change-Id: Ib69fc0017b3bfbc8da4dfd4301710fbf88be661a
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
Co-Authored-By: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Change-Id: I562fa187094f212003d0b17d20675f771cf082e6

Change-Id: Icc13e3607c6d1dfa4e12d1ceaf9ea5546a22a12b

Change-Id: I2ae1a402e723cd1063618d1b9fb18f6adb27a390

Depends-On: https://review.opendev.org/c/openstack/kolla/+/832163
Change-Id: Ia2dba1854e925041ae23c731273b810bb2d5ec30

As we have only source image type then we do not need to handle other
option.

Change-Id: I753aa0182cfc975bb8b5cd1476ab2c336a7691fa

This key can be used by users in networking-generic-switch
scenario instead of adding cleartext password in ml2_conf.ini.

Change-Id: I10003e6526a55a97f22678ab81c411e4645c5157

In most real world deployments, there will be multiple backend DNS
servers, allow to specify all of them for the pool configuration.

Change-Id: Ic9737d0446a807891b429f080ae1bf048a3c8e4a

This project [1] can provide a one-stop solution to log collection,
cleaning, indexing, analysis, alarm, visualization, report generation
and other needs, which involves helping operator or maintainer to
quickly solve retrieve problems, grasp the operational health of the
platform, and improve the level of platform management.

[1] https://wiki.openstack.org/wiki/Venus

Change-Id: If3562bbed6181002b76831bab54f863041c5a885

In Kolla Ansible OpenStack deployments, by default, libvirt is
configured to allow read-write access via an unauthenticated,
unencrypted TCP connection, using the internal API network.  This is to
facilitate migration between hosts.

By default, Kolla Ansible does not use encryption for services on the
internal network (and did not support it until Ussuri). However, most
other services on the internal network are at least authenticated
(usually via passwords), ensuring that they cannot be used by anyone
with access to the network, unless they have credentials.

The main issue here is the lack of authentication. Any client with
access to the internal network is able to connect to the libvirt TCP
port and make arbitrary changes to the hypervisor. This could include
starting a VM, modifying an existing VM, etc. Given the flexibility of
the domain options, it could be seen as equivalent to having root access
to the hypervisor.

Kolla Ansible supports libvirt TLS [1] since the Train release, using
client and server certificates for mutual authentication and encryption.
However, this feature is not enabled by default, and requires
certificates to be generated for each compute host.

This change adds support for libvirt SASL authentication, and enables it
by default. This provides base level of security. Deployments requiring
further security should use libvirt TLS.

[1] https://docs.openstack.org/kolla-ansible/latest/reference/compute/libvirt-guide.html#libvirt-tls

Depends-On: https://review.opendev.org/c/openstack/kolla/+/833021
Closes-Bug: #1964013
Change-Id: Ia91ceeb609e4cdb144433122b443028c0278b71e

Add "enable_prometheus_etcd_integration" configuration parameter which
can be used to configure Prometheus to scrape etcd metrics endpoints.
The default value of "enable_prometheus_etcd_integration" is set to
the combined values of "enable_prometheus" and "enable_etcd".

Change-Id: I7a0b802c5687e2d508e06baf55e355d9761e806f

Ironic has changed the default PXE to be iPXE (as opposed to plain
PXE) in Yoga. Kolla Ansible supports either one or the other and
we tend to stick to upstream defaults so this change enables
iPXE instead of plain PXE - by default - the users are allowed
to change back and they need to take one other action so it is
good to remind them via upgrade notes either way.

Change-Id: If14ec83670d2212906c6e22c7013c475f3c4748a

An FCD, also known as an Improved Virtual Disk (IVD) or
Managed Virtual Disk, is a named virtual disk independent of
a virtual machine. Using FCDs for Cinder volumes eliminates
the need for shadow virtual machines.
This patch adds Kolla support.

Change-Id: Ic0b66269e6d32762e786c95cf6da78cb201d2765

The following variables are added:

* prometheus_blackbox_exporter_cmdline_extras
* prometheus_elasticsearch_exporter_cmdline_extras
* prometheus_haproxy_exporter_cmdline_extras
* prometheus_memcached_exporter_cmdline_extras
* prometheus_mysqld_exporter_cmdline_extras
* prometheus_node_exporter_cmdline_extras
* prometheus_openstack_exporter_cmdline_extras

Change-Id: I5da2031b9367115384045775c515628e2acb1aa4

NSXP is the OpenStack support for the NSX Policy platform.
This is supported from neutron in the Stein version. This patch
adds Kolla support

This adds a new neutron_plugin_agent type 'vmware_nsxp'. The plugin
does not run any neutron agents.

Change-Id: I9e9d8f07e586bdc143d293e572031368af7f3fca

The value of node_custom_config should is {{ node_config }}/config,
when specified using --configdir

Change-Id: I076b7d2c8980ddd3baa28f998f84a6b7005dc352

Add support for deploying the Kolla Prometheus libvirt exporter image to
facilitate gathering metrics from the Nova libvirt service.

Co-Authored-by: Dr. Jens Harbott <harbott@osism.tech>
Change-Id: Ib27e60c39297b86ae674297370f9543ab08cda05
Partially-Implements: blueprint libvirt-exporter