And also simplify it to a single command.

Change-Id: I0e1a34711e4e0536d8d51002b316b011f2a22296

Starting with Zed, Ironic builds IPA on centos9.

Change-Id: I7bacd392944148f471ec421301bfc8106a55b68a

To reflect stable branches.

Change-Id: I8d7e0cbda3f55e2c96121e4d819385020f4e8aad

This change amends the docs as we test Ironic quite thoroughly.

Change-Id: I1ff27dfb328fd7b06fd6951a37cf9a0e111e753b

Add a new parameter 'ironic_dnsmasq_dhcp_ranges' and enable the
configuration of the corresponding 'dhcp-range' and 'dhcp-option'
blocks in Ironic Inspector dnsmasq for multiple ranges.

The old parameters 'ironic_dnsmasq_dhcp_range' and
'ironic_dnsmasq_default_gateway' used for the only range are now
removed.

This change implements the same solution used in the TripleO several
years ago in the: Ie49b07ffe948576f5d9330cf11ee014aef4b282d

Also, this change contains: Iae15e9db0acc2ecd5b087a9ca430be948bc3e649
fix for lease time.
The value can be changed globally or per range.

Change-Id: Ib69fc0017b3bfbc8da4dfd4301710fbf88be661a
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
Co-Authored-By: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Change-Id: I2ae1a402e723cd1063618d1b9fb18f6adb27a390

Change-Id: I8e4096d7136d0ce9e54f1af0bb9ba110487fb35b

Depends-On: https://review.opendev.org/c/openstack/kolla/+/832163
Change-Id: Ia2dba1854e925041ae23c731273b810bb2d5ec30

Ironic has changed the default PXE to be iPXE (as opposed to plain
PXE) in Yoga. Kolla Ansible supports either one or the other and
we tend to stick to upstream defaults so this change enables
iPXE instead of plain PXE - by default - the users are allowed
to change back and they need to take one other action so it is
good to remind them via upgrade notes either way.

Change-Id: If14ec83670d2212906c6e22c7013c475f3c4748a

This is a docs amendment to let users know that calling
init-runonce is not a required deployment step and it may not work
for them if they modified the defaults.

Change-Id: Ia3922b53d91a1a820447fec6a8074b941edc2ee9

This change updates documentation, examples and tests to support
Ironic inspection through DHCP-relay. The dnsmasq service should be
configured with more specific format set in the variable
``ironic_dnsmasq_dhcp_range``. See the dnsmasq manual page [1].

[1] https://thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html



Change-Id: I9488a72db588e31289907668f1997596a8ccdec6
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>

Curl would not work without -L on old openstack.org URLs.

TrivialFix

Change-Id: I7ed7bd336f4b874fc6027cb9ad20669b08e4a7e9

Basically, there are three main installation scenario:

Scenario 1:
Ironic installation together with other openstack services
including keystone. In this case variable enable_keystone
is set to true and keystone service will be installed
together with ironic installation. It is possible realise this
scenario, no fix needed

Scenario 2:
Ironic installation with connection to already installed
keystone. In this scenario we have to set enable_keystone
to “No” to prevent from new keystone service installation
during the ironic installation process. But in other hand,
we need to have correct sections in ironic.conf to provide
all information needed to connect to existing keystone.
But all sections for keystone are added to ironic.conf only
if enable_keystone var is set to “Yes”. It isn’t possible
to realise this scenario. Proposed fix provide support for
this scenario, where multiple regions share the same
keystone service.

Scenario 3:
No keystone integration. Ironic don't connect to Keystone.
It is possible realise this scenario, no fix needed

Proposed solution also keep the default behaviour: if no
enable_keystone_integration is manually defined by default
it takes value of enable_keystone variable and all behaviour
is the same. But if we don't want to install keystone and
want to connect to existing one at the same time, it will be
possible to set enable_keystone var to “No”
(preventing keystone from installation) and at the same
time set ironic_enable_keystone_integration to Yes to allow
needed section appear in ironic.conf through templating.

Change-Id: I0c7e9a28876a1d4278fb2ed8555c2b08472864b9

In the Xena release, Ironic removed the iSCSI driver [1]. The
recommended driver is direct, which uses HTTP to transfer the disk
image. This requires an HTTP server, and the simplest option is to use
the one currently deployed when enable_ironic_ipxe is set to true. For
this reason, this patch always enables the HTTP server running on the
conductor.

iPXE is still enabled separately, since it cannot currently be used at
the same time as PXE.

[1] https://review.opendev.org/c/openstack/ironic/+/789382

Change-Id: I30c2ad2bf2957ac544942aefae8898cdc8a61ec6

Adds a support matrix page to documentation.

Change-Id: Ia783f7c42219617cde2accd3f1db013c9bda7679

Ports need physical-network to be set for a flat network, otherwise they
will not bind.

Closes-Bug: #1862628
Change-Id: I9d579b4317a8acbc3e51bbd9c0236846b75d598b

Backport: train

* Ironic dropped CoreOS IPA images in Train - use CentOS DIB images
* Nova flavor requires dropping standard resources
* Link to sections in ironic docs

Change-Id: Id65ada7cd6766d3a907a5a1da54978b56319979c

This ensures we have version-specific references to other projects [1].
Note that this doesn't mean the URLs are actually valid - we need to do
more work (linkcheck?) here, but it's an improvement nonetheless.

[1] https://docs.openstack.org/openstackdocstheme/latest/#external-link-helper

Change-Id: I118e4d211617c5df66ff04dc04e308a1d2fc67ad

Specifying a nic for dnsmasq when using ironic inspector,
by default is network_interface

Change-Id: I579c667c40b14030f340c1f3d7f57fe37613ee1a

Change index to ease identify what service want to look.
Split docs into more specific folder such as networking
and storage.

Change-Id: Ic7ac12b3dd555fa5c018eeb897ccd4a5a2dfe8f3