As kolla-toolbox is mounting /run:/run
there is no need to mount also /run/openvswitch.
This is causing /run/openvswitch is mounted
again and again up to 32767 times after kolla-toolbox
restart.

Closes-Bug: #1979295
Change-Id: I49b3bde8b2bd61b6c931a81542a0d89f8a303ffc

Per comments on [1].

[1] https://review.opendev.org/c/openstack/kolla-ansible/+/843727

Change-Id: I60162b54bc06e158534d29311d4474b34750c64d

Fixes an issue where access rules failed to validate:

    Cannot validate request with restricted access rules. Set
    service_type in [keystone_authtoken] to allow access rule validation

I've used the values from the endpoint. This was mostly a straight
forward copy and paste, except:

- versioned endpoints e.g cinderv3 where I stripped the version
- monasca has multiple endpoints associated with a single service. For
  this, I concatenated logging and monitoring to be logging-monitoring.

Closes-Bug: #1965111
Change-Id: Ic4b3ab60abad8c3dd96cd4923a67f2a8f9d195d7

This patch simply fix a typo in 'influxdb_internal_endpoint' variable.

Change-Id: I1b1068e84be7f7eaff1a4eab1ba9ddcd6f4241c7

This patch is removing nova configuration
options, this was probably caused by migration
from nova-placement to placement.

Change-Id: Ib54b26428b79d5c4f554928b8634a0bb4e884a90

This patch is removing api related configuration
from service's config files as we are using
apache mod_wsgi and this configuration is not
used.

Change-Id: I69a1542a6f24214fbf6e703782aefb566de4fb26

We need this to be stop-start as haproxy and proxysql need to be
reconfigured simultaneously when switching between them.

This change also introduces checks for service enablement.

Co-Authored-By: Radosław Piliszek <radoslaw.piliszek@gmail.com>
Change-Id: I2e10f490305f3d8b1b7abbc66ddb40df65c37fe7

Following up on [1].
The 3 variables are only introducing noise after we removed
the reliance on Keystone's admin port.

[1] I5099b08953789b280c915a6b7a22bdd4e3404076

Change-Id: I3f9dab93042799eda9174257e604fd1844684c1c

Docs and reno included.

Change-Id: I5099b08953789b280c915a6b7a22bdd4e3404076

Add a switches to enable/disable deploy of the Masakari monitors.

Change-Id: I3ab603f7cab7946ea8f2e063fe91190d6592066a
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>

Closes-Bug: #1975598
Change-Id: If4c85f8e960141d08a89accdc11a3271f31974c1

Change-Id: Ib4b15ed4feac82d8492b1c0f0238a752eac668e6

Since enabling libvirt SASL authentication, the masakari instance
monitor fails to connect to libvirt. We see the following error in logs:

    libvirt.libvirtError: authentication failed: Failed to start SASL
    negotiation: -4 (SASL(-4): no mechanism available: No worthy mechs
    found)

This change adds support for SASL authentication in Masakari instance
monitor.

Depends-On: https://review.opendev.org/c/openstack/kolla/+/834456
Closes-Bug: #1965754
Change-Id: I974046662b383a12ac6281b725523760a96657bd

Change-Id: I9e4e1287ea69960ae3b13734acc3eb0b087a8d86

In the last PTG it was decided to drop the keystone_token_provider variable, because there is no other option anymore.

Signed-off-by: Ramona Rautenberg <rautenberg@osism.tech>
Change-Id: I1ee2c3f9b7dbbbf4633c5874cdbb3c4f8c09e277

Redis Sentinel modifies its config.
Since we now check config in check-containers,
the redis_sentintel container is restarted each time.

This patch together with kolla patch fixes this issue.

Closes-Bug: #1967664
Depends-On: https://review.opendev.org/c/openstack/kolla/+/840954
Change-Id: Ia76329cb851d266cd888f51b7f70a4cdc40e3ac3

"Smoke tests" for barbican, cinder, glance and keystone have been removed as discussed in PTG April 2022.

Signed-off-by: Tim Beermann <beermann@osism.tech>
Change-Id: I613287a31e0ea6aede070e7e9c519ab2f5f182bd

Add an enable_cinder_backend_pure_iscsi and
enable_cinder_backend_pure_fc options to etc/kolla/globals.yml
to enable use of the FlashArray backend.
Update the documentation to include a section on configuring
Cinder with the FlashArray.

Implements: blueprint pure-cinder-driver
Change-Id: I464733f1322237321ed1ffff8636cf30bd1cbb38

The inactivity probe interval of the OpenFlow  connection
to the OpenvSwitch integration bridge, in seconds. If the
value is zero, it disables the connection keepalive  fea‐
ture.

If  the  value  is  nonzero,  then it will be forced to a
value of at least 5s.

The value is set to 60 seconds by default as described in
"OVN issues in the field".

https://www.openvswitch.org/support/ovscon2019/day1/1436-OVSCON-Nouman.pdf
https://www.ovn.org/support/dist-docs/ovn-controller.8.html

Change-Id: I7066c3a8b33b482774f310c45142ac2936a5c405

Closes-Bug: #1972818

Change-Id: I9e36b9169b6725bf6db953e464fc099087747778

Change from comma separated list of memcache servers to space separated list.
Comma seperated list results in a 500 error response.
Upstream docs state this should be space separated and can be found here:
https://github.com/zmartzone/mod_auth_openidc/blob/master/auth_openidc.conf#L629-L631

Closes-Bug: #1972033
Change-Id: Ibaef3672c656213dd5ba1488379d686130e041c5

This is a follow up to I7e5c1e20c7b66b64cbd333f669ef8d8da60daaa8.

Change-Id: I11a86f59c1fb9cddde3370b544ee7bf4e8ae4fb4

Change-Id: Iff395a1dff654eb4b005eec2db395b603b1aec72

With the parameter bifrost_deploy_verbosity it is possible
to set the verbosity of the bootstrap of Bifrost.

This makes it possible to reduce verbosity when running
/bifrost/playbooks/install.yaml if needed.

Change-Id: I5815220f2193a492ae7e1f63443075790ae7aaef

We run some nova tasks once per cell, using a condition to match a
single host in the cell. In other similar tasks, we use run_once, which
will fail all hosts if the task fails. Typically these tasks are
critical, and that is desirable. However, with the approach used in
nova-cell to support multiple cells, if a once-per-cell task fails, then
other hosts will continue to execute, which could lead to unexpected
results.

This change adds any_errors_fatal to the plays or blocks that run these
tasks.

Closes-Bug: #1948694

Change-Id: I2a5871ccd4e8198171ef3239ce95f475f3e4b051

Change-Id: Ide82b7a7fa6752b60f2c9c31cdc4c79183fc62f6

We have only one value for install_type now and it gets removed from
image names.

Change-Id: I8bf95fd7aa9dd26b80d618ca0fcb097003b4cb0a

In fluentd v1.0, "format" became a deprecated parameter,
replaced by "<parse>"

Change-Id: I0825e81fcd90fbc7f64c8df3ea9ae199ad79294a

This uses the same approach as the mariadb role (and others).

Closes-Bug: #1928193
Co-Authored-By: John Garbutt <johng@stackhpc.com>
Change-Id: I79a7a8c80327cfd9ef31d17fe71f450a181a638c

Adds the ability to configure the Prometheus Pushgateway options
alongside the rest of kolla-ansible's configurations.

Closes-Bug: #1968597
Signed-off-by: Juan Pablo Suazo <jsuazo@whitestack.com>
Change-Id: I2d20288267ceda95076229628db10299ddbde31f

Add a new parameter 'ironic_dnsmasq_dhcp_ranges' and enable the
configuration of the corresponding 'dhcp-range' and 'dhcp-option'
blocks in Ironic Inspector dnsmasq for multiple ranges.

The old parameters 'ironic_dnsmasq_dhcp_range' and
'ironic_dnsmasq_default_gateway' used for the only range are now
removed.

This change implements the same solution used in the TripleO several
years ago in the: Ie49b07ffe948576f5d9330cf11ee014aef4b282d

Also, this change contains: Iae15e9db0acc2ecd5b087a9ca430be948bc3e649
fix for lease time.
The value can be changed globally or per range.

Change-Id: Ib69fc0017b3bfbc8da4dfd4301710fbf88be661a
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
Co-Authored-By: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Currently the ovs-dpdkctl.sh file is present in the tools
directory and the "Copying ovs-dpdkctl tool" task accesses it.

This is bad practice. Files copied from a role should either be
referenced by an absolute path or be part of the role itself.

This change moves the ovs-dpdkctl.sh file in the files
directory of the role.

Change-Id: I01459d39207e54f270f32f37b4a5153c5a819347

Signed-off-by: Bernd Mueller <mueller@b1-systems.de>
Change-Id: I90d98be9dfb14942ffb4f5293cf52a96a643ee90

Change-Id: I562fa187094f212003d0b17d20675f771cf082e6

Change-Id: I2ae1a402e723cd1063618d1b9fb18f6adb27a390

Change-Id: I8e4096d7136d0ce9e54f1af0bb9ba110487fb35b

Depends-On: https://review.opendev.org/c/openstack/kolla/+/832163
Change-Id: Ia2dba1854e925041ae23c731273b810bb2d5ec30

As we have only source image type then we do not need to handle other
option.

Change-Id: I753aa0182cfc975bb8b5cd1476ab2c336a7691fa

This change addresses an issue in the nova-libvirt-cleanup command,
added in I46854ed7eaf1d5b5e3ccd8531c963427848bdc99.

Check for rc=1 pgrep command, since a lack of matches is a pass.

Also, use bash for set -o pipefail.

Change-Id: Iffda0dfffce8768324ffec55e629134c70e2e996

This key can be used by users in networking-generic-switch
scenario instead of adding cleartext password in ml2_conf.ini.

Change-Id: I10003e6526a55a97f22678ab81c411e4645c5157