In some cases it may be desirable to run the libvirt daemon on the host.
For example, when mixing host and container OS distributions or
versions.

This change makes it possible to disable the nova_libvirt container, by
setting enable_nova_libvirt_container to false. The default values of
some Docker mounts and other paths have been updated to point to default
host directories rather than Docker volumes when using a host libvirt
daemon.

This change does not handle migration of existing systems from using
a nova_libvirt container to libvirt on the host.

Depends-On: https://review.opendev.org/c/openstack/ansible-collection-kolla/+/830504

Change-Id: Ia1239069ccee39416b20959cbabad962c56693cf

In Kolla Ansible OpenStack deployments, by default, libvirt is
configured to allow read-write access via an unauthenticated,
unencrypted TCP connection, using the internal API network.  This is to
facilitate migration between hosts.

By default, Kolla Ansible does not use encryption for services on the
internal network (and did not support it until Ussuri). However, most
other services on the internal network are at least authenticated
(usually via passwords), ensuring that they cannot be used by anyone
with access to the network, unless they have credentials.

The main issue here is the lack of authentication. Any client with
access to the internal network is able to connect to the libvirt TCP
port and make arbitrary changes to the hypervisor. This could include
starting a VM, modifying an existing VM, etc. Given the flexibility of
the domain options, it could be seen as equivalent to having root access
to the hypervisor.

Kolla Ansible supports libvirt TLS [1] since the Train release, using
client and server certificates for mutual authentication and encryption.
However, this feature is not enabled by default, and requires
certificates to be generated for each compute host.

This change adds support for libvirt SASL authentication, and enables it
by default. This provides base level of security. Deployments requiring
further security should use libvirt TLS.

[1] https://docs.openstack.org/kolla-ansible/latest/reference/compute/libvirt-guide.html#libvirt-tls

Depends-On: https://review.opendev.org/c/openstack/kolla/+/833021
Closes-Bug: #1964013
Change-Id: Ia91ceeb609e4cdb144433122b443028c0278b71e

An FCD, also known as an Improved Virtual Disk (IVD) or
Managed Virtual Disk, is a named virtual disk independent of
a virtual machine. Using FCDs for Cinder volumes eliminates
the need for shadow virtual machines.
This patch adds Kolla support.

Change-Id: Ic0b66269e6d32762e786c95cf6da78cb201d2765

NSXP is the OpenStack support for the NSX Policy platform.
This is supported from neutron in the Stein version. This patch
adds Kolla support

This adds a new neutron_plugin_agent type 'vmware_nsxp'. The plugin
does not run any neutron agents.

Change-Id: I9e9d8f07e586bdc143d293e572031368af7f3fca

Nova provides a mechanism to set static vendordata via a file [1].
This patch provides support in Kolla Ansible for using this
feature.

Arguably this could be part of a generic mechansim for copying
arbitrary config, but:

- It's not clear if there is anything else that would take
  advantage of this
- One size might not fit all

[1] https://docs.openstack.org/nova/latest/configuration/config.html#api.vendordata_jsonfile_path

Change-Id: Id420376d96d0c40415c369ae8dd36e845a781820

Trivial Fix

Change-Id: Ie08877e339455bed45ee467a87de9648678e88c5

Qinling project is retiring in Wallaby cycle[1].
This commit removes the ansible roles of Qinling project
before its code is removed.

Needed-By: https://review.opendev.org/c/openstack/qinling/+/764521

[1] http://lists.openstack.org/pipermail/openstack-discuss/2020-November/018638.html

Change-Id: I6543bacff638b1649511f7e779807954c34ef570

Nova has reversed their deprecation of the VMware driver, and the Kolla
community has shown an interest in it.

Change-Id: I82f1074da56ed16c08317d1f92ed7f0a6f4a149a

These are noop after Hyper-V support was removed.

Change-Id: Ib451b154893e5cedc366aed83c35f48d92c7ab82

Change-Id: I2e22ec47f644de2f1509a0111c9e1fffe8da0a1a

Change-Id: Iea3f4f3d2e5c6040c1e0bc7bfae8719cc7d8ac55

Zun has a new component "zun-cni-daemon" which should be
deployed in every compute nodes. It is basically an implementation
of CNI (Container Network Interface) that performs the neutron
port binding.

If users is using the capsule (pod) API, the recommended deployment
option is using "cri" as capsule driver. This is basically to use
a CRI runtime (i.e. CRI plugin for containerd) for supporting
capsules (pods). A CRI runtime needs a CNI plugin which is what
the "zun-cni-daemon" provides.

The configuration is based on the Zun installation guide [1].
It consits of the following steps:
* Configure the containerd daemon in the host. The "zun-compute"
  container will use grpc to communicate with this service.
* Install the "zun-cni" binary at host. The containerd process
  will invoke this binary to call the CNI plugin.
* Run a "zun-cni-daemon" container. The "zun-cni" binary will
  communicate with this container via HTTP.

Relevant patches:
Blueprint: https://blueprints.launchpad.net/zun/+spec/add-support-cri-runtime
Install guide: https://review.opendev.org/#/c/707948/
Devstack plugin: https://review.opendev.org/#/c/705338/
Kolla image: https://review.opendev.org/#/c/708273/

[1] https://docs.openstack.org/zun/latest/install/index.html

Depends-On: https://review.opendev.org/#/c/721044/
Change-Id: I9c361a99b355af27907cf80f5c88d97191193495

The support of vmware, xenserver and hyperv was deprecated.

Change-Id: Id06770c2247ce242f1fc2ac7220bbe6c3070598d

Change-Id: Ia122aa157413e71eb50bd22e3c9f44a2e5c0bf4f

This is to fix the duplicated words issue like
"Other services that are are out of scope of this".

Change-Id: Ie4882dbb64d6e8774888b97895af20ba3855f0f8

This also enables Placement when Zun is enabled like Kolla Ansible
already does with Nova.

Change-Id: Id2a09f702e8503b49d2b9e73e06b2ce9f4d168a9
Closes-bug: #1840573

Add documentation about deploying nova with multiple cells.

Change-Id: I89ee276917e5b9170746e07b7f644c7593b03da1
Depends-On: https://review.opendev.org/#/c/675659/
Related: blueprint bp/support-nova-cells

Introduce kolla_address filter.
Introduce put_address_in_context filter.

Add AF config to vars.

Address contexts:
- raw (default): <ADDR>
- memcache: inet6:[<ADDR>]
- url: [<ADDR>]

Other changes:

globals.yml - mention just IP in comment

prechecks/port_checks (api_intf) - kolla_address handles validation

3x interface conditional (swift configs: replication/storage)

2x interface variable definition with hostname
(haproxy listens; api intf)

1x interface variable definition with hostname with bifrost exclusion
(baremetal pre-install /etc/hosts; api intf)

neutron's ml2 'overlay_ip_version' set to 6 for IPv6 on tunnel network

basic multinode source CI job for IPv6

prechecks for rabbitmq and qdrouterd use proper NSS database now

MariaDB Galera Cluster WSREP SST mariabackup workaround
(socat and IPv6)

Ceph naming workaround in CI
TODO: probably needs documenting

RabbitMQ IPv6-only proto_dist

Ceph ms switch to IPv6 mode

Remove neutron-server ml2_type_vxlan/vxlan_group setting
as it is not used (let's avoid any confusion)
and could break setups without proper multicast routing
if it started working (also IPv4-only)

haproxy upgrade checks for slaves based on ipv6 addresses

TODO:

ovs-dpdk grabs ipv4 network address (w/ prefix len / submask)
not supported, invalid by default because neutron_external has no address
No idea whether ovs-dpdk works at all atm.

ml2 for xenapi
Xen is not supported too well.
This would require working with XenAPI facts.

rp_filter setting
This would require meddling with ip6tables (there is no sysctl param).
By default nothing is dropped.
Unlikely we really need it.

ironic dnsmasq is configured IPv4-only
dnsmasq needs DHCPv6 options and testing in vivo.

KNOWN ISSUES (beyond us):

One cannot use IPv6 address to reference the image for docker like we
currently do, see: https://github.com/moby/moby/issues/39033
(docker_registry; docker API 400 - invalid reference format)
workaround: use hostname/FQDN

RabbitMQ may fail to bind to IPv6 if hostname resolves also to IPv4.
This is due to old RabbitMQ versions available in images.
IPv4 is preferred by default and may fail in the IPv6-only scenario.
This should be no problem in real life as IPv6-only is indeed IPv6-only.
Also, when new RabbitMQ (3.7.16/3.8+) makes it into images, this will
no longer be relevant as we supply all the necessary config.
See: https://github.com/rabbitmq/rabbitmq-server/pull/1982

For reliable runs, at least Ansible 2.8 is required (2.8.5 confirmed
to work well). Older Ansible versions are known to miss IPv6 addresses
in interface facts. This may affect redeploys, reconfigures and
upgrades which run after VIP address is assigned.
See: https://github.com/ansible/ansible/issues/63227

Bifrost Train does not support IPv6 deployments.
See: https://storyboard.openstack.org/#!/story/2006689



Change-Id: Ia34e6916ea4f99e9522cd2ddde03a0a4776f7e2c
Implements: blueprint ipv6-control-plane
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Adds a top-level guide for Nova, with links off to the various virt
driver guides.

Generalises the libvirt TLS guide into a libvirt guide, and adds info on
hardware virtualisation and qemu vs. kvm.

Adds information on configuring consoles.

Change-Id: I36beaaee313bdbc4bcf8cc15c41dda245a5a81ba

To securely support live migration between computenodes we should enable
tls, with cert auth, instead of TCP with no auth support.

Implements: blueprint libvirt-tls

Change-Id: I22ea6233933c840b853fdcc8e03400b2bf577271

After the integration with placement [1], we need to configure how
zun-compute is going to work with nova-compute.

* If zun-compute and nova-compute run on the same compute node,
  we need to set 'host_shared_with_nova' as true so that Zun
  will use the resource provider (compute node) created by nova.
  In this mode, containers and VMs could claim allocations against
  the same resource provider.
* If zun-compute runs on a node without nova-compute, no extra
  configuration is needed. By default, each zun-compute will create
  a resource provider in placement to represent the compute node
  it manages.

[1] https://blueprints.launchpad.net/zun/+spec/use-placement-resource-management

Change-Id: I2d85911c4504e541d2994ce3d48e2fbb1090b813

Change-Id: Icf3f01516185afb7b9f642407b06a0204c36ecbe
Closes-Bug: #1840315
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Masakari provides Instances High Availability Service for
OpenStack clouds by automatically recovering failed Instances.

Depends-On: https://review.openstack.org/#/c/615469/


Change-Id: I0b3457232ee86576022cff64eb2e227ff9bbf0aa
Implements: blueprint ansible-masakari
Co-Authored-By: Gaëtan Trellu <gaetan.trellu@incloudus.com>

This ensures we have version-specific references to other projects [1].
Note that this doesn't mean the URLs are actually valid - we need to do
more work (linkcheck?) here, but it's an improvement nonetheless.

[1] https://docs.openstack.org/openstackdocstheme/latest/#external-link-helper

Change-Id: I118e4d211617c5df66ff04dc04e308a1d2fc67ad

The project has been retired and there will be no Train release [1].
This patch removes Neutron LBaaS support in Kolla.

[1] https://review.opendev.org/#/c/658494/

Change-Id: Ic0d3da02b9556a34d8c27ca21a1ebb3af1f5d34c

- Remove trusted_cidrs that has just been removed from
Qinling code.
- Remove use_api_certificate because it's true by default
- Improve list syntax
- Add etcd section

Change-Id: I0426a9d61fbeaa23a1affbc7e981a78283e88263

Qinling is an OpenStack project to provide "Function as a Service".
This project aims to provide a platform to support serverless functions.

Change-Id: I239a0130f8c8b061b531dab530d65172b0914d7c
Implements: blueprint ansible-qinling-support
Story: 2005760
Task: 33468

To avoid links to OpenStack docs getting out of date in our docs, use
the latest version.

Ideally after cutting each stable branch we should change these links to
use the current release.

Co-Authored-By: Isaiah Inuwa
Change-Id: Ia1e3c720f4e688861b8f76874a3943b0f4e50b17

Change index to ease identify what service want to look.
Split docs into more specific folder such as networking
and storage.

Change-Id: Ic7ac12b3dd555fa5c018eeb897ccd4a5a2dfe8f3