Docs adapted to match.
Removed the unsupported-for-quay option to set up
a pull-through cache.

Closes-Bug: #1942134
Change-Id: If5a26b1ba4bf35bc29306c24f608396dbf5e3371

Multiple inventories can now be passed to `kolla-ansible`.  This can be
useful to construct a common inventory that is shared between multiple
environments.

Change-Id: I2ac5d7851b310bea2ba362b353f18c592a0a6a2e

Ansible facts can have a large impact on the performance of the Ansible
control host. This patch introduces some control over which facts are
gathered (kolla_ansible_setup_gather_subset) and which facts are stored
(kolla_ansible_setup_filter). By default we do not change the default
values of these arguments to the setup module. The flexibility of these
arguments is limited, but they do provide enough for a large performance
improvement in a typical moderate to large OpenStack cloud.

In particular, the large complex dict fact for each interface has a
large effect, and on an OpenStack controller or hypervisor there may be
many virtual interfaces. We can use the kolla_ansible_setup_filter
variable to help:

    kolla_ansible_setup_filter: 'ansible_[!qt]*'

This causes Ansible to collect but not store facts matching that
pattern, which includes the virtual interface facts. Currently we are
not referencing other facts matching the pattern within Kolla Ansible.
Note that including the 'ansible_' prefix causes meta facts module_setup
and gather_subset to be filtered, but this seems to be the only way to
get a good match on the interface facts. To work around this, we use
ansible_facts rather than module_setup to detect whether facts exist in
the cache.

The exact improvement will vary, but has been reported to be as large as
18x on systems with many virtual interfaces.

For reference, here are some other tunings tried:

* Increased the number of forks (great speedup depending of the size of
  the deployment)
* Use `strategy = mitogen_linear` (cut processing time in half)
* Ansible caching (little speed up)
* SSH tunning (little speed up)

Co-Authored-By: Mark Goddard <mark@stackhpc.com>
Closes-Bug: #1921538
Change-Id: Iae8ca4aae945892f1dc65e1b10381d2e26e88805

This commit adds two new cli commands to allow an operator
to read and write passwords into a configured Hashicorp Vault
KV.

Change-Id: Icf0eaf7544fcbdf7b83f697cc711446f47118a4d

By default, Ansible injects a variable for every fact, prefixed with
ansible_. This can result in a large number of variables for each host,
which at scale can incur a performance penalty. Ansible provides a
configuration option [0] that can be set to False to prevent this
injection of facts. In this case, facts should be referenced via
ansible_facts.<fact>.

This change updates all references to Ansible facts within Kolla Ansible
from using individual fact variables to using the items in the
ansible_facts dictionary. This allows users to disable fact variable
injection in their Ansible configuration, which may provide some
performance improvement.

This change disables fact variable injection in the ansible
configuration used in CI, to catch any attempts to use the injected
variables.

[0] https://docs.ansible.com/ansible/latest/reference_appendices/config.html#inject-facts-as-vars

Change-Id: I7e9d5c9b8b9164d4aee3abb4e37c8f28d98ff5d1
Partially-Implements: blueprint performance-improvements

* add CentOS Stream 8 info & reno
* mark RHEL as deprecated in docs

Change-Id: Ifa3b8c7365e4092202bf9e89b67293cf8d983e0a

The docker configuration should be a URL, not a host:port.

Closes-Bug: #1919932
Change-Id: I5025fdb7e48c79a107b45f1454f5d5e81367a2f9

Min version stays as 2.9

Change-Id: I7ec8c5eb36757248c9aa016dc7d4e495ec5bb635

Stolen from Kayobe.

Change-Id: I42a2ef84e5fe570e8001908614337e64d035ec99

There are inconsitencies across the documentation and the source code files
when it comes to project's name (Kolla Ansible vs. Kolla-Ansible). This
commit aims at unifying it so that the naming becomes consistent everywhere.

Change-Id: I903b2e08f5458b1a1abc4af3abefe20b66c23a54

Python virtual environment creation fails on a fresh system if
python3-venv is not installed (Debian/Ubuntu).

Installation instructions used to be in the Quick Start guide, but
were removed in kolla-ansible/+/735894

Change-Id: I867322ee43d509fe46b6afba9216586515fee0d5

* Use 'apt install' command instead of legacy 'apt-get'

Change-Id: Idae8d325bce354fa3b4c5be412965122af8f1413

The multinode guide hints at how to setup the registry as a registry
mirror, however it does not provide all information necessary. This
change fixes that, and separates the local registry and registry mirror
cases.

Change-Id: I0790830e1c21520df2534d2f3b1ea96010064355
Closes-Bug: #1901768

fix the rest of  mistakes, and remove duplicated line.

Change-Id: Id50dfd9cfa794526bdb69ee6372a29c0584310d3

The openstack Ussuri and Victoria versions no longer support the
Centos7 and pyrhon2 environment packages. Correct the missing
problems in the latest document

Change-Id: I55fd1bf451d2bdae696ab32d1faffaba72701229

Change-Id: I8e3e0268faae871a197dc01d1c9447d00ef5d1e0

Forward-ported from Train commit
I19c7f05b538a7abc9253194bf041c037b1998378.

Change-Id: If07b84e0bbdcb7da8dbef87cc8826987f1d11cf8

It should be bumped by [1], but missing, this PS to
be supplement.

[1]: https://review.opendev.org/#/c/753776/2

Depends-On: I5befc72a4894d625ca352b27df9d3aa84a2f5b2c
Change-Id: I75742653cb62c27317abf297a0143399d6adc644

Change-Id: I439e8afc87d21aa8b7f381534c963e39f69c5d73

Change-Id: I5befc72a4894d625ca352b27df9d3aa84a2f5b2c

There is a time once every 2 years when ubuntu team releases new LTS
release. And then UCA joins with binary packages for current OpenStack
development cycle.

It is this time for Ubuntu 20.04 'focal'.

Includes CI fix to pass:

[CI] Temporarily block new Ansible

The proper fix [1] needs fixing older branches before newer.
This one allows to fix CI first, in the usual order.

To revert after [1] gets merged in all relevant branches.

[1] https://review.opendev.org/745648

Old-Change-Id: Ifbd37d8addd4322773118e2e9d46494741a8ae66
Related-Bug: #1891145

Depends-on: https://review.opendev.org/#/c/738994/


Change-Id: Ib8b70ee40ec2d19509cc84c0f530612f81907721
Co-Authored-By: Radosław Piliszek <radoslaw.piliszek@gmail.com>

Mostly due to move to Python3-only.

Also fix the other venv docs to avoid virtualenv. :-)

Change-Id: Id89c4ec6ff8b80feace01a3dee7dd30dd4cc5ec5

Added a spec file for this blueprint.
Changed the kolla-ansible script to accept more than one
globals.yml file. That will still be the main one but operators
will be able to create more, under the /etc/kolla/globals.d
directory.
Also added some paragraphs in the quickstart documentation
about this.
Finally, Adding a release note

Change-Id: I34eb91d0e2ed80694594b8fc6801cf8ad77da754
Implements: blueprint multiple-globals-files

Python packages are now prefixed with 'python3' instead of 'python'.
'bridge-utils' is also no longer shipped.

Change-Id: I6e8765e53fd5c3a7f7169671d75e965c22213c61
Signed-off-by: Luke Short <ekultails@gmail.com>

The removed parts are *not* to be done 99% of operators' time,
especially for quickstart procedure.
Kolla Ansible is meant to default to a compatible release.

See [1] as well.

[1] https://review.opendev.org/730498

Change-Id: Iadafcd992a9fd030fa62fb5f7f9429c3f479ac1b

Adds a support matrix page to documentation.

Change-Id: Ia783f7c42219617cde2accd3f1db013c9bda7679

Also better organise the 'tips and tricks' section.

Change-Id: If20a89ae93b64b5a1b5895bb9dc73c4e70adaba7
Related-Bug: #1862649

Kolla-Ansible Ceph deployment mechanism has been deprecated in Train [1].

This change removes the Ansible code and associated CI jobs.

[1]: https://review.opendev.org/669214

Change-Id: Ie2167f02ad2f525d3b0f553e2c047516acf55bc2

to clean old keys on merge.

Change-Id: Ifcc99e7c737707eea9e951db066dc94fd85bd9f7

This change introduces prune-images command.

Uses docker_prune module of Ansible that comes with version 2.8.

Depends-On: https://review.opendev.org/#/c/699333/

Implements: blueprint docker-image-pruning

Change-Id: Icbf374dd50e1cc1f1604bb4fa779b34279efd50c

Change-Id: I03ee4020cfb277fd3d6c5f5c70a3a6eeee2cac9e

Maximum supported version is set to 2.9

Updated the minimum supported version to 2.8

Implements: blueprint ansible-max-version

Change-Id: I97cc95e37f49886e6d74f2d5a789b923b14b5a2d

Change-Id: I401a073eb6225e90b6f9d6b2a32f33d22d1d7a79

Add documentation about deploying nova with multiple cells.

Change-Id: I89ee276917e5b9170746e07b7f644c7593b03da1
Depends-On: https://review.opendev.org/#/c/675659/
Related: blueprint bp/support-nova-cells

Sometimes as cloud admins, we want to only update code that is running
in a cloud.  But we dont need to do anything else.  Make an action in
kolla-ansible that allows us to do that.

Change-Id: I904f595c69f7276e71692696471e32fd1f88e6e8
Implements: blueprint deploy-containers-action

We have agreed to remove support for Oracle Linux.

http://lists.openstack.org/pipermail/openstack-discuss/2019-June/006896.html

Change-Id: If11b4ff37af936a0cfd34443e8babb952307882b

These filters can be used to capture a lot of the logic that we
currently have in 'when' statements, about which services are enabled
for a particular host.

In order to use these filters, it is necessary to install the
kolla_ansible python module, and not just the dependencies listed in
requirements.txt. The CI test and quickstart install from source
documentation has been updated accordingly.

Ansible is not currently in OpenStack global requirements, so for unit
tests we avoid a direct dependency on Ansible and provide fakes where
necessary.

Change-Id: Ib91cac3c28e2b5a834c9746b1d2236a309529556

This is required for the dict2items filter.

Change-Id: I60a04e839bf06506ff36c2631a286130d5fde972

This change makes kolla-ansible more compatible with
RHEL which does not provide epel-release package.

EPEL was required to install simplejson from rpm
which was an ansible requirement when used python
version was below 2.5 ([1]). This has been obsolete for
quite a time so it's a good idea to get rid of it.

This change includes update of docs to read more properly.

[1] https://docs.ansible.com/ansible/2.3/intro_installation.html



Change-Id: I825431d41fbceb824baff27130d64dabe4475d33
Signed-off-by: Radosław Piliszek <radoslaw.piliszek@gmail.com>

The keepalived_virtual_router_id should be changed from the default in
the case of a multi-region deployment where the VIP of the different
regions resides on the same subnet.

This is not immediately clear - this change should make it more obvious.

Change-Id: Ia4899ba407937d9f27832c9d123701729e89987a