diff --git a/ansible/physical-network.yml b/ansible/physical-network.yml
index 45600e5d0b54a5377763dad11741b647b98f2402..c00eb64220977204442f7fc6b78d35962ef768f5 100644
--- a/ansible/physical-network.yml
+++ b/ansible/physical-network.yml
@@ -36,6 +36,7 @@
- junos
- mellanox
- nclu
+ - nvue
- openvswitch
tasks:
- name: Fail if both interface name and description limits are specified
@@ -202,3 +203,14 @@
- role: nclu-switch
nclu_switch_config: "{{ switch_config }}"
nclu_switch_interface_config: "{{ switch_interface_config }}"
+
+- name: Ensure Cumulus physical switches are configured with NVUE
+ hosts: switches_of_type_nvue:&switches_in_display_mode_False
+ gather_facts: no
+ roles:
+ - role: ssh-known-host
+
+ - role: nvue-switch
+ nvue_switch_config: "{{ switch_config }}"
+ nvue_switch_interface_config: "{{ switch_interface_config }}"
+ nvue_switch_save: "{{ switch_config_save }}"
diff --git a/ansible/roles/nvue-switch/README.md b/ansible/roles/nvue-switch/README.md
new file mode 100644
index 0000000000000000000000000000000000000000..229f4d5cb20dfad5a40e2c29532b562774d82475
--- /dev/null
+++ b/ansible/roles/nvue-switch/README.md
@@ -0,0 +1,73 @@
+NVUE Switch
+===========
+
+This role configures Cumulus switches using the `nvidia.nvue.command` Ansible
+module. It provides a fairly minimal abstraction of the configuration interface
+provided by the `nvidia.nvue.command` module, allowing for application of
+arbitrary switch configuration options.
+
+Requirements
+------------
+
+The switches should be configured to allow SSH access.
+
+Role Variables
+--------------
+
+`nvue_switch_config` is a list of NVUE commands to apply to the switch, and
+defaults to an empty list. Commands must be formatted without the `nv` prefix,
+which is added by the `nvidia.nvue.command` module before execution on the
+switch.
+
+`nvue_switch_interface_config` contains interface configuration. It is a dict
+mapping switch interface names to configuration dicts. Interfaces can be switch
+physical interfaces, but also special interfaces such as bridges or bonds. Each
+dict may contain the following items:
+
+- `description` - a description to apply to the interface.
+- `config` - a list of per-interface configuration, each applied with a `nv
+ set interface <interface-name>` prefix.
+
+Dependencies
+------------
+
+None
+
+Example Playbook
+----------------
+
+The following playbook configures hosts in the `nvue-switches` group. It
+applies global configuration to configure a BGP AS and add two EBGP neighbors
+using BGP Unnumbered, enables two host interfaces with jumbo frames, and
+attaches them to a traditional bridge called `bridge1` configured with an IP
+address.
+
+ ---
+ - name: Ensure Cumulus switches are configured with NVUE
+ hosts: nvue-switches
+ gather_facts: no
+ roles:
+ - role: nvue-switch
+ nvue_switch_config:
+ - "set router bgp autonomous-system 65000"
+ - "set router bgp neighbor swp51 interface remote-as external"
+ - "set router bgp neighbor swp52 interface remote-as external"
+ nvue_switch_interface_config:
+ swp1:
+ description: server1
+ config:
+ - "link mtu 9000"
+ swp2:
+ description: server2
+ config:
+ - "link mtu 9000"
+ bridge1:
+ config:
+ - "ip address 10.100.100.1/24"
+ - "ports swp1"
+ - "ports swp2"
+
+Author Information
+------------------
+
+- Michal Nasiadka (<mnasiadka@gmail.com>)
diff --git a/ansible/roles/nvue-switch/defaults/main.yml b/ansible/roles/nvue-switch/defaults/main.yml
new file mode 100644
index 0000000000000000000000000000000000000000..3bdb3fd1980a8008c5db68103084423ec4ec7d25
--- /dev/null
+++ b/ansible/roles/nvue-switch/defaults/main.yml
@@ -0,0 +1,11 @@
+---
+# List of configuration lines to apply to the switch.
+nvue_switch_config: []
+
+# Interface configuration. Dict mapping switch interface names to configuration
+# dicts. Each dict contains a 'description' item and a 'config' item which
+# should contain a list of per-interface configuration.
+nvue_switch_interface_config: {}
+
+# Whether to save the NVUE configuration to disk.
+nvue_switch_save: false
diff --git a/ansible/roles/nvue-switch/tasks/main.yml b/ansible/roles/nvue-switch/tasks/main.yml
new file mode 100644
index 0000000000000000000000000000000000000000..dc65697c66a4240c1dac838be95b7f7c3a76f5c0
--- /dev/null
+++ b/ansible/roles/nvue-switch/tasks/main.yml
@@ -0,0 +1,7 @@
+---
+- name: Ensure Cumulus switches are configured with NVUE
+ nvidia.nvue.command:
+ assume_yes: true
+ atomic: true
+ save: "{{ nvue_switch_save | bool }}"
+ template: "{{ lookup('template', 'nvue-config.j2') }}"
diff --git a/ansible/roles/nvue-switch/templates/nvue-config.j2 b/ansible/roles/nvue-switch/templates/nvue-config.j2
new file mode 100644
index 0000000000000000000000000000000000000000..05aa09b964da8fc447f23706ff4c66ed095fddb3
--- /dev/null
+++ b/ansible/roles/nvue-switch/templates/nvue-config.j2
@@ -0,0 +1,12 @@
+#jinja2: trim_blocks: True,lstrip_blocks: True
+{% for line in nvue_switch_config %}
+{{ line }}
+{% endfor %}
+{% for interface, config in nvue_switch_interface_config.items() %}
+{% for line in config.config %}
+set interface {{ interface }} {{ line }}
+{% endfor %}
+{% if config.description is defined %}
+set interface {{ interface }} description {{ config.description }}
+{% endif %}
+{% endfor %}
diff --git a/doc/source/configuration/reference/physical-network.rst b/doc/source/configuration/reference/physical-network.rst
index a6656cc34a64f24133c8254393e6372126ecda2a..96b0ad6525afef829e86ecb9772520074ca0fa54 100644
--- a/doc/source/configuration/reference/physical-network.rst
+++ b/doc/source/configuration/reference/physical-network.rst
@@ -17,6 +17,8 @@ The following switch operating systems are currently supported:
* Arista EOS
* Cumulus Linux (via `Network Command Line Utility (NCLU)
<https://docs.nvidia.com/networking-ethernet-software/cumulus-linux-44/System-Configuration/Network-Command-Line-Utility-NCLU/>`__)
+* Cumulus Linux (via `NVIDIA User Experience command line utility (NVUE)
+ <https://docs.nvidia.com/networking-ethernet-software/cumulus-linux/System-Configuration/NVIDIA-User-Experience-NVUE/>`__)
* Dell OS 6
* Dell OS 9
* Dell OS 10
@@ -211,11 +213,20 @@ Configuration for these devices is applied using the ``nclu`` Ansible module.
``switch_type`` should be set to ``nclu``.
+Cumulus Linux (with NVUE)
+-------------------------
+
+Configuration for these devices is applied using the ``nvidia.nvue.command``
+Ansible module.
+
+``switch_type`` should be set to ``nvue``.
+
SSH configuration
^^^^^^^^^^^^^^^^^
-As with any non-switch host in the inventory, the ``nclu`` module relies on the
-default connection parameters used by Ansible:
+As with any non-switch host in the inventory, the ``nclu`` and
+``nvidia.nvue.command`` modules rely on the default connection parameters used
+by Ansible:
* ``ansible_host`` is the hostname or IP address. Optional.
diff --git a/releasenotes/notes/cumulus-nvue-switch-9f52d701f6c49712.yaml b/releasenotes/notes/cumulus-nvue-switch-9f52d701f6c49712.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..6a481c903881850813fc271090feb587d870837a
--- /dev/null
+++ b/releasenotes/notes/cumulus-nvue-switch-9f52d701f6c49712.yaml
@@ -0,0 +1,7 @@
+---
+features:
+ - |
+ Adds support for configuring Cumulus switches using the `NVIDIA User
+ Experience command line utility (NVUE)
+ <https://docs.nvidia.com/networking-ethernet-software/cumulus-linux/System-Configuration/NVIDIA-User-Experience-NVUE/>`__.
+ This is integrated with the ``kayobe physical network configure`` command.
diff --git a/requirements.yml b/requirements.yml
index 641c29059fa48f2f641ef5302a537c03c05f768b..25cff4953271e03ff01cb6ea50e374ab86c29ab1 100644
--- a/requirements.yml
+++ b/requirements.yml
@@ -7,6 +7,8 @@ collections:
version: 3.11.0
- name: dellemc.os10
version: 1.1.1
+ - name: nvidia.nvue
+ version: 1.2.0
- name: openstack.cloud
version: '<3'
- name: stackhpc.linux